conn req codev2rev 62011-02-15IEC 62258
connection requirement code
0112/2///61360_4#AAD006
mnemonic code used to identify the requirement for electrical connection to the die substrate
- Used by classes
- 1
Also appears in1#
Entities with the same name in other dictionaries:
- Code
AAD006- Data type
- ENUM_CODE_TYPE(0112/2///61360_4#ASA001)
All properties21#
- Version
- 2
- Revision
- 6
- Preferred name
- connection requirement code
- Short name
- conn req code
- Definition
- mnemonic code used to identify the requirement for electrical connection to the die substrate
- Definition source
- IEC 62258
- Remark
- Where the value of the code is ISOL, no connection may be made to the substrate. |Where the value of the code is OPT connection to the substrate is optional but any connection made must be to the supply as defined by substrate connection. |Where the value of the code is CONN a connection from the substrate to a terminal on the die or to a supply terminal is mandatory. |Where the value of the code is N/A connection to the substrate is not appropriate or not possible. |Where the value of the code is N/K no information on the connection requirement is available.
- Definition class
- 0112/2///61360_4#AAA302die device
- Drawing reference
- M..4
- Responsible committee
- SC3D
- Publisher
- IEC
- Published in
- IEC 61360-4
- Published in
- NON_DEPENDENT_P_DET
- Status level
- Standard
- Version release date
- 2015-08-17
- Revision release date
- 2011-02-15
- Version initiation date
- 2015-08-17
- Original definition date
- 2003-02-21
- MDC_P022
- ENUM_CODE_TYPE(0112/2///61360_4#ASA001)
- MDC_P040
- A56