r_idv1rev 52011-08-31IEC 60748-3 (II.2.1.10) (1986)
differential input resistance
0112/2///61360_4#AAF163
minimum resistance between the inputs of a differential amplifier at reference conditions
- Used by classes
- 1
Also appears in1#
Entities with the same name in other dictionaries:
- Code
AAF163- Data type
- LEVEL(MIN) OF REAL_MEASURE_TYPE
- Unit
- UAA017 UAA017
- Condition
0112/2///61360_4#AAE995
All properties25#
- Version
- 1
- Revision
- 5
- Preferred name
- differential input resistance
- Short name
- r_id
- Definition
- minimum resistance between the inputs of a differential amplifier at reference conditions
- Definition source
- IEC 60748-3 (II.2.1.10) (1986)
- Remark
- In order to be able to consider the input impedance as a pure resistance, the measurement signal frequency must be sufficiently low so that there are no significant phase differences between the voltages at the input terminals of the amplifier to be measured with or without the series resistor.
- Definition class
- 0112/2///61360_4#AAA001component
- Unit structure
- Ω
- Drawing reference
- NR3..3.3ES2
- Value format
- {0112/2///61360_4#AAE995}
- Initial value
- 0112/2///62720#UAA017 UAA017
- Responsible committee
- SC3D
- Publisher
- IEC
- Published in
- IEC 61360-4
- Published in
- DEPENDENT_P_DET
- Status level
- Standard
- Version release date
- 2015-08-17
- Revision release date
- 2011-08-31
- Version initiation date
- 2015-08-17
- Original definition date
- 1996-08-01
- MDC_P022
- LEVEL(MIN) OF REAL_MEASURE_TYPE
- MDC_P025_1
- r_id}
- MDC_P040
- E33