r_bendv2rev 72011-02-15
bending radius
0112/2///61360_4#AAF470
minimum and typical value of the allowed radius measured to the centre-line of the conductor when bending it into a planar curve
- Used by classes
- 1
Also appears in2#
Entities with the same name in other dictionaries:
- Code
AAF470- Data type
- LEVEL(MIN,TYP) OF REAL_MEASURE_TYPE
- Unit
- UAA726 UAA726
All properties24#
- Version
- 2
- Revision
- 7
- Preferred name
- bending radius
- Short name
- r_bend
- Definition
- minimum and typical value of the allowed radius measured to the centre-line of the conductor when bending it into a planar curve
- Note
- Applying a smaller bending radius than the minimum value may result in damaging the conductor, affecting its function or shorten its lifetime
- Remark
- The minimum value applies to a single bending of a conductor and the typical value to the multiple bending of a conductor. The minimum bending radius is often implemented using a template.
- Definition class
- 0112/2///61360_4#AAA001component
- Unit structure
- m
- Drawing reference
- NR3..3.3ES2
- Initial value
- 0112/2///62720#UAA726 UAA726
- Responsible committee
- SC3D
- Publisher
- IEC
- Published in
- IEC 61360-4-DB
- Published in
- NON_DEPENDENT_P_DET
- Status level
- Standard
- Version release date
- 2015-08-17
- Revision release date
- 2011-02-15
- Version initiation date
- 2015-08-17
- Original definition date
- 2006-09-11
- MDC_P001_6
- 0112/2///61360_4#AAF470bending radius
- MDC_P022
- LEVEL(MIN,TYP) OF REAL_MEASURE_TYPE
- MDC_P025_1
- r_bend
- MDC_P040
- T03