types of component mounting features

snap-on mounting rail with hat-shaped symmetrical cross-section, width of 15 mm and height above seating plane of 5,5 mm

snap-on mounting rail with hat-shaped symmetrical cross-section, width of 35 mm and height above seating plane of 15 mm

snap-on mounting rail with hat-shaped symmetrical cross-section, width of 35 mm and height above seating plane of 7,5 mm

snap-on mounting rail with hat-shaped symmetrical cross-section, width of 75 mm and height above seating plane of 25 mm

method for mounting components in which the components are mounted or placed using shaped fixtures

mounting rail with C-shaped cross-section, width of 20 mm and height above seating plane of 9,25 mm

mounting rail with C-shaped cross-section, width of 30 mm and height above seating plane of 14,25 mm

mounting rail with C-shaped symmetrical cross-section, width of 40 mm and height above seating plane of 21,75 mm

mounting rail with C-shaped cross-section, width of 50 mm and height above seating plane of 29,25 mm

mounting rail with G-shaped cross-section, width of 32 mm and height above seating plane of 15 mm respectively 8,9 mm

electrical connection of components to a conductive pattern by the use of component holes

method for mounting components in which the package leads are inserted through holes in the mounting platform

electrical connection of leads or terminations of a component directly to the conductive pattern of a printed board by soldering electrodes of the component without using component holes

method for mounting components in which the components are mounted using one or more mounting studs being part of the component

method for mounting components in which the components provide threaded holes and are mounted using fasteners being screwed into these holes

method for mounting a device in which the device provides hole(s) and is mounted using screws or bolts through these holes

method for mounting and positioning a device using its connection pins