Transmitter body [1]Corps du transmetteur [1]Messumformerkörper

special mounting methods and conditions that apply to the device or component

degree of ingress protection offered by a housing or enclosure

classification of a fixation of a device or component according to the method of mounting

mass of a device or component in full working order

extent of protection provided by an enclosure against access to hazardous parts, against ingress of solid foreign objects and/or ingress of water and verified by standardized test methods

horizontal distance between the left-hand and right-hand extremes of an object when standing in its normal position of use

vertical distance between the top and bottom of an object when standing in its normal position of use

colour of a component

set of specific measures applied to equipment to avoid ignition of a surrounding explosive atmosphere

horizontal distance between the front and back of an object when standing in its normal position of use or the distance from end to end of a long, thin object

internal diameter of a component measured at the point of maximum restriction

finishing specification of a device or flange surface expressed as roughness, either as a maximum depth or in a standardized roughness dimension

classification of a protective coating according to the type and finish of the coating material

type of material of any thermal insulation provided or specified by the customer for the electronics housing

type and finish of a material applied to provide a protective coating

cardinality property for process connection

@number of connection facilities

classification of a device body according to its mechanical design

classification of a device body according to its general protective purpose

set of parts used for the mounting or installation of a device

standard to which a statement on an enclosure protection type or class refers

maximum design pressure for a packing gland

material of which a compression ferrule used for sealing is made

material of which a cap or an end cover is made

actual external diameter of a circular or cylindrical object

free volume within a device

precautions taken or to be taken during manufacture of the device regarding non-wetted parts to ensure its safe operation under special operation conditions

@number of equipotential bonding connections

reference to block ABC172

reference to block ABC174

reference to block ABC231

reference to block ABC330

reference to block ABC346

reference to block ABC377

reference to block ABU458