Transmitter housing [1]Boîtier du transmetteur [1]Messumformergehäuse [1]

special mounting methods and conditions that apply to the device or component

classification of a housing according to its general protective purpose

classification of a housing according to its mechanical design

material of which a housing is made

classification of a transmitter, totalizer or indicator according to its arrangement with respect to the device body

degree of ingress protection offered by a housing or enclosure

classification of a fixation of a device or component according to the method of mounting

designation of a device or component power according to source, nominal voltage, current mode and frequency

mass of a device or component in full working order

extent of protection provided by an enclosure against access to hazardous parts, against ingress of solid foreign objects and/or ingress of water and verified by standardized test methods

additional protective measures for the device recommended or required by a supplier

horizontal distance between the left-hand and right-hand extremes of an object when standing in its normal position of use

vertical distance between the top and bottom of an object when standing in its normal position of use

colour of a component

set of specific measures applied to equipment to avoid ignition of a surrounding explosive atmosphere

feature in the device to detect errors during normal operation

horizontal distance between the front and back of an object when standing in its normal position of use or the distance from end to end of a long, thin object

internal diameter of a component measured at the point of maximum restriction

finishing specification of a device or flange surface expressed as roughness, either as a maximum depth or in a standardized roughness dimension

classification of a protective coating according to the type and finish of the coating material

alphanumeric character sequence identifying a head transmitter

type of material of any thermal insulation provided or specified by the customer for the electronics housing

type and finish of a material applied to provide a protective coating

provision of a mechanical extension intended to increase the distance of the electronics from the process, serving to increase the allowable process temperature

@number of connection facilities

standard to which a statement on an enclosure protection type or class refers

design of a device or a device component mounting classified by the type of surface on/to which it will be mounted

classification of the configuration of a device according to the proximity of the operator

angle of a fastening measure with respect to the vertical

actual external diameter of a circular or cylindrical object

@number of equipotential bonding connections

reference to block ABC172

reference to block ABC229

reference to block ABC231

reference to block ABC330

reference to block ABC375

reference to block ABC376

classification of a means of protection against static discharge according to its electrical and mechanical construction

classification of a means of overvoltage protection according to its electrical and mechanical construction

classification of a controller according to its time and control behaviour

number of sensors that can be connected to perform the function of a device

classification of a gain according to its qualitative level