Absolute performance for densityPerformance absolue pour la masse volumiqueLeistungsdaten für Dichte in absoluten Einheiten

largest positive or negative value of error of the average upscale or downscale value at each point of density measurement expressed as an absolute value

equation from which the measured error of a device can be calculated

for a density measurement, the maximum positive and negative deviation from the specified characteristic curve observed in testing a device under specified conditions and by a specified procedure

absolute error of a device measuring density under reference conditions, when the input is at the lower range value

@number of accuracies for a subrange of density

algebraic difference between the extreme values obtained by a number of consecutive measurements of the output over a short period of time for the same value of the input under the same operating conditions, approaching from the same direction, for full range traverses of density

equation from which the non-repeatability of a device can be calculated

additional percentage error to be added to the measured error of a measured value

basis for stating an additional error for analog output

quality which characterizes the ability of a density measuring instrument to provide an indicated value close to a true value of the measurand under reference conditions

reference to block ABC070

reference to block ABC210

reference to block ABC282

reference to block ABC324

probability, generally expressed as a percentage, that the true value of a statistically estimated quantity falls within a pre-established interval about the estimated value