Line or nozzleLigne ou tuyère d'équipementRohrleitung oder Stutzen

construction standard used for the engineering and fabrication of a component or connection

difference between the outside and the inside diameter of a pipe, conduit or vessel, divided by two

distance between the fixing point of a nozzle to a vessel or pipe and the sealing surface or connection end of the process connection

alphanumeric designation of size for components of a pipe work system, which is used for reference purposes

recommended orientation for installation of the device for which it is or should be designed

alphanumeric designation of a pressure allowable within a piping system or piece of equipment, which is used for reference purposes

internal diameter of a component measured at the point of maximum restriction

material of a protective lining that prevents the contact of a fluid with the material from which the equipment is made

alphanumeric character sequence describing the purpose of a line or nozzle

alphanumeric character sequence identifying a line or nozzle

name of a line or nozzle

plain text characterizing a line or nozzle

characteristic of a pipe rating system giving the wall thickness for the pipe nominal diameter

standard on which a pipe schedule is based

user specific alphanumeric character sequence identifying a specification of piping components for use within its confines and which contains the definition of pipe and all related components that are to be used under a specific pressure, temperature condition – usually including material and further information

orientation of the nozzle referenced to the ground

elevation of the nozzle referenced to the pipe or the equipment to which it is attached

thickness of a lining or cladding used to prevent the contact of process fluid with the material from which the equipment is made

finishing specification of a surface expressed as roughness, either as a maximum depth or in a standardized roughness dimension

reference to block ABC353

distance between the measuring device reference point and the point at which the measurement is made

shortest insertion length a device may have resulting from deployment geometry parameters

greatest insertion length a device may have resulting from deployment geometry parameters

diameter of a line with a nozzle mounted on it such that the center line of the nozzle is perpendicular to the center line of the line

reference to block ABH135

reference to block ABU458