Low pressure side line or nozzle
properties characterizing a side line or a nozzle and its low pressure connection for differential pressure measurement
Hierarchy#
Ancestors (top) → ABC325 (highlighted) → subclasses and powertype instances. Capped at 12 each; see the full lists in the sections below.
Higher level classes3#
Declared properties22#
construction standard used for the engineering and fabrication of a component or connection
difference between the outside and the inside diameter of a pipe, conduit or vessel, divided by two
distance between the fixing point of a nozzle to a vessel or pipe and the sealing surface or connection end of the process connection
alphanumeric designation of size for components of a pipe work system, which is used for reference purposes
recommended orientation for installation of the device for which it is or should be designed
alphanumeric designation of a pressure allowable within a piping system or piece of equipment, which is used for reference purposes
internal diameter of a component measured at the point of maximum restriction
material of a protective coating or lining that prevents the contact of a fluid with the material from which the equipment is made
alphanumeric character sequence describing the purpose of a line or nozzle
alphanumeric character sequence identifying a line or nozzle
name of a line or nozzle
plain text characterizing a line or nozzle
characteristic of a pipe rating system giving the wall thickness for the pipe nominal diameter
standard on which a pipe schedule is based
user specific alphanumeric character sequence identifying a specification of piping components for use within its confines and which contains the definition of pipe and all related components that are to be used under a specific pressure, temperature condition – usually including material and further information
orientation of the nozzle referenced to the ground
elevation of the nozzle referenced to the pipe or the equipment to which it is attached
thickness of a lining or cladding used to prevent the contact of process fluid with the material from which the equipment is made
finishing specification of a surface expressed as roughness, either as a maximum depth or in a standardized roughness dimension
reference to block ABC353
reference to block ABH135
reference to block ABU458
Subclasses#
No subclasses
This class is a leaf — no other classes inherit from it.
Metadata#
- Version
- 2
- Revision
- 1
- Status
- Standard
- Responsible committee
- SC65E – IEC 61987
- Change request
C00004- Dates
- Original: 2013-09-27
- Current version: 2016-05-24
- Current revision: 2016-05-24
Full source data#
Every key from the original .xls export, including multilingual variants, status, publisher, committee, and workbook-specific codes.
Raw properties (25 keys from source .xls) — click to expand
- C002
- C00004
- C016
- Standard
- C017.de
- 0
- C017.fr
- 0
- C018.de
- 2014-12-12
- C018.fr
- 2013-09-27
- C019.de
- Mr. W. Hartmann
- C019.fr
- UTE
- MDC_P001_5
- 0112/2///61987#ABC325
- MDC_P002_1
- 2
- MDC_P002_2
- 1
- MDC_P003_0
- 2018-03-28
- MDC_P003_1
- 2013-09-27
- MDC_P003_2
- 2016-05-24
- MDC_P003_3
- 2016-05-24
- MDC_P004.de
- Rohrleitung oder Apparatestutzen an der Niederdruckseite
- MDC_P004.en
- Low pressure side line or nozzle
- MDC_P004.fr
- Ligne ou buse du côté basse pression
- MDC_P006.de
- Merkmale, die eine Rohrleitung oder einen Apparatestutzen und den dazu gehörigen Niederdruckanschluss für eine Differenzdruckmessung kennzeichnen
- MDC_P006.en
- properties characterizing a side line or a nozzle and its low pressure connection for differential pressure measurement
- MDC_P006.fr
- propriétés caractérisant une ligne auxiliaire ou une buse et sa connexion basse pression pour la mesure de pression différentielle
- MDC_P010
- 0112/2///61987#ABV501
- MDC_P011
- ITEM_CLASS
- MDC_P012
- SC65E – IEC 61987
- MDC_P014
- {0112/2///61987#ABB336,0112/2///61987#ABB337,0112/2///61987#ABB338,0112/2///61987#ABB339,0112/2///61987#ABA576,0112/2///61987#ABA591,0112/2///61987#ABB340,0112/2///61987#ABB341,0112/2///61987#ABA555,0112/2///61987#ABA910,0112/2///61987#ABA554,0112/2///61987#ABB343,0112/2///61987#ABA145,0112/2///61987#ABA590,0112/2///61987#ABB344,0112/2///61987#ABB345,0112/2///61987#ABC983,0112/2///61987#ABA911,0112/2///61987#ABB453,0112/2///61987#ABB521,0112/2///61987#ABH293,0112/2///61987#ABU164}
Version history3#
IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.