Parameters of pneumatic rotary actuator
properties characterizing the configuration of a pneumatic rotary actuator according to its specific values
Hierarchy#
Ancestors (top) → ABD962 (highlighted) → subclasses and powertype instances. Capped at 12 each; see the full lists in the sections below.
Higher level classes3#
Declared properties13#
for reference purposes, amount of movement required by a rotary-acting actuator to change from its fully open to its fully closed position
characteristic of a signal or a physical output variable as response to a linear signal or physical input variable
value defining the start of the range of a span adjustment, expressed as percentage of span
value defining the start of the range of a zero point adjustment, expressed as percentage of span
value defining the start of the linear range of a rotary travel
highest torque that a rotary actuator can exert at highest operating pressure
highest gauge pressure that should be applied to a pneumatic actuator
lowest torque that a rotary actuator can exert at lowest operating pressure
@number of angular limit stops
value defining the end of the range of a span adjustment, expressed as percentage of span
value defining the end of the range of a zero point adjustment, expressed as percentage of span
value defining the end of the linear range of a rotary travel
reference to block ABD803
Subclasses#
No subclasses
This class is a leaf — no other classes inherit from it.
Metadata#
- Version
- 1
- Revision
- 2
- Status
- Standard
- Responsible committee
- SC65E – IEC 61987
- Change request
C00009- Dates
- Original: 2013-09-02
- Current version: 2013-09-02
- Current revision: 2014-06-18
Full source data#
Every key from the original .xls export, including multilingual variants, status, publisher, committee, and workbook-specific codes.
Raw properties (20 keys from source .xls) — click to expand
- C002
- C00009
- C016
- Standard
- C017.de
- 0
- C018.de
- 2014-12-12
- C019.de
- Mr. W. Hartmann
- MDC_P001_5
- 0112/2///61987#ABD962
- MDC_P002_1
- 1
- MDC_P002_2
- 2
- MDC_P003_0
- 2018-03-28
- MDC_P003_1
- 2013-09-02
- MDC_P003_2
- 2013-09-02
- MDC_P003_3
- 2014-06-18
- MDC_P004.de
- Kennwerte des pneumatischen Schwenkantriebs
- MDC_P004.en
- Parameters of pneumatic rotary actuator
- MDC_P006.de
- Merkmale, die die Eigenschaften eines pneumatischen Schwenkantriebs gemäß dessen Kennwerten kennzeichnen
- MDC_P006.en
- properties characterizing the configuration of a pneumatic rotary actuator according to its specific values
- MDC_P010
- 0112/2///61987#ABV501
- MDC_P011
- ITEM_CLASS
- MDC_P012
- SC65E – IEC 61987
- MDC_P014
- {0112/2///61987#ABD633,0112/2///61987#ABD652,0112/2///61987#ABD619,0112/2///61987#ABD551,0112/2///61987#ABD539,0112/2///61987#ABD611,0112/2///61987#ABD789,0112/2///61987#ABD609,0112/2///61987#ABD787,0112/2///61987#ABD608,0112/2///61987#ABD786,0112/2///61987#ABD667,0112/2///61987#ABE059}
Version history2#
IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.