Structural design of a bypass/measuring chamberKonstruktiver Aufbau eines Bypass/einer Messkammer

construction standard used for the engineering and fabrication of a component or connection

alphanumeric designation of size for components of a pipe work system, which is used for reference purposes

alphanumeric designation of a pressure allowable within a piping system or piece of equipment, which is used for reference purposes

internal diameter of a component measured at the point of maximum restriction

classification of a protective coating according to the type and finish of the coating material

material of a protective lining that prevents the contact of a fluid with the material from which the equipment is made

@number of lines or nozzles

reference to block ABC322

reference to block ABC353

vertical distance between two process connections

length available within a device

classification of a pipe according to its mechanical design

classification of a vent valve according to its mechanical design

classification of the drain valve according to its mechanical design

classification of the shut-off valve located at the upper part of a measuring chamber according to its mechanical construction

classification of the shut-off valve located at the lower side of a measuring chamber according to its mechanical construction

classification of a bypass/measuring chamber according to its constructional design

position of a lower connection regarding to the device in its mounting position

position of an upper connection regarding to the device in its mounting position

classification of a head according to its constructional design

orientation of a head with respect to the horizontal

vertical distance between two process connections

given radius of the weld pad

position where the support plate is mounted

offset orientation of a valve relative to the valve main axis

mounting orientation of a valve relative to the valve main axis