Structural design of a thermowellKonstruktiver Aufbau eines Thermometer-Schutzrohrs

precautions taken or to be taken during manufacture of the device regarding wetted parts to ensure its safe operation under special operation conditions

classification of a component surface finish according to the method used to achieve it

internal diameter of a component measured at the point of maximum restriction

tightness of a pressure or vacuum housing expressed in terms of the leakage rate to or from its environment

classification of a seal according to its construction

@number of additional wetted parts materials

finishing specification of a surface expressed as roughness, either as a maximum depth or in a standardized roughness dimension

actual external diameter of a circular or cylindrical object

classification of a feedthrough according to the mechanical design

reference to block ABC339

reference to block ABC353

overall length of that part of a device or component to be found within a containment

classification of a thermowell according to its mechanical design as defined in a reference standard

standard to which the mechanical design of a thermowell refers

classification of a thermowell according to a mechanical design not defined in a standard or by additional information to the standard design

length specified by the manufacturer for a device or device component, which is used for reference purposes

largest diameter of an insert that guarantees accommodation in a receptacle

material of a protective coating that prevents the contact of a fluid with the material from which the equipment is made

classification of a connection to a thermowell extension according to its fabricated form

classification of a connection to an insert according to its fabricated form

classification of a connection to a connection head according to its fabricated form

mean thickness of a sheath

any frequency at which free oscillation can exist in a physical system when the excitation has been removed

stress at which a material begins to deform plastically

reference to block ABF325

reference to block ABF326

reference to block ABF329

classification of a shank according to its constructional design

length of that part of a fitting, if appropriate without the flange thickness, that is lies outside of the equipment

classification of a cap or plug according to its constructional design

material of which a cap or plug is made

reference to block ABU458

reference to block ABC403