Absolute performance for active power [I/O module]Leistungsdaten für Wirkleistung in absoluten Einheiten [I/O-Modul]

equation from which the measured error of a device can be calculated

equation from which the non-repeatability of a device can be calculated

reference to block ABC210

probability, generally expressed as a percentage, that the true value of a statistically estimated quantity falls within a pre-established interval about the estimated value

quality which characterizes the ability of an active power measuring instrument to provide an indicated value close to a true value of the measurand under reference conditions

for an active power measurement, maximum positive and negative deviation from the specified characteristic curve observed in testing a device under specified conditions and by a specified procedure

largest positive or negative value of error of the average upscale or downscale value at each point of active power measurement expressed as an absolute value

algebraic difference between the extreme values obtained by a number of consecutive measurements of the output over a short period of time for the same value of the input under the same operating conditions, approaching from the same direction, for full range traverses of active power

absolute error of a device measuring active power under reference conditions, when the input is at the lower range value

reference to block ABP035