standard form
dual-in-line package outline style with through-hole leads in standard form
- Inherited
- 16
Hierarchy#
Ancestors (top) → AAA423 (highlighted) → subclasses and powertype instances. Capped at 12 each; see the full lists in the sections below.
Higher level classes6#
Declared properties15#
distance as specified by level (miNomax) of the furthest part of the component above the seating plane, measured in a direction perpendicular to the plane
perpendicular distance as specified by level (miNomax) between the seating plane and the base plane
distance as specified by level (miNomax) of the furthest part of the component above the base plane, measured in a direction perpendicular to the plane
major dimension as specified by level (miNomax) of the cross-section of the stand-off
width as specified by level (miNomax) of a square terminal or the length of the major axis of a terminal with a rectangular cross-section
length as specified by level (miNomax) of the minor axis of a terminal with a rectangular cross-section
major dimension as specified by level (miNomax) of the package, excluding terminals presented for mounting in the length direction, measured in a plane parallel to the seating plane
minor dimension as specified by level (miNomax) of the package, excluding terminals, measured in a plane parallel to the seating plane
linear spacing as specified by level (miNomax) between the true positions of terminal centres
length as specified by level (miNomax) of terminal available for mounting measured from the seating plane
overall width, as specified by level (miNomax), in the package width direction which includes the package width and any terminals which are bent to be perpendicular to the seating plane
distance as specified by level (miNomax) from the end terminal true position to the extremity of the package
angle as specified by level (miNomax) between the terminal and the seating plane
distance as specified by level (miNomax) between the centres of two parallel rows of terminals when mounted
distance as specified by level (miNomax) between the centres of the ends of two parallel rows of terminals prior to mounting
Inherited properties (16) — click to expand
code of the name which identifies a particular variant of the shape of the terminals on a package
suffix to the IEC 60191-4 code which identifies the form or shape of the terminals
prefix to the IEC 60191-4 code which identifies the position of the terminals on the package body
total quantity of potential terminal positions in accordance with the specified terminal designation system
maximum quantity of potential terminal positions which can be unoccupied
IEC 60191-4 code which identifies the general physical form of the package
actual quantity of potential terminal positions which are occupied
reference to the identity of the drawing on which the dimension set is based
reference to the identifier for the document from which a dimension set was taken
number of the page in the source document on which the dimension set is given
code by which the manufacturer identifies the package style or a specific dimension set
code of a standard dimension set taken from a standards document
identity of a standards document that contains lists of dimension sets for electric or electronic components
direction of the sequence of numbering of the terminals of a component when viewed from the top
flag to indicate whether the package is intended for surface-mount applications
code of the type of geometry possessed by an electric-electronic component
Subclasses#
No subclasses
This class is a leaf — no other classes inherit from it.
Metadata#
- Version
- 1
- Revision
- 5
- Status
- Standard
- Publisher
- IEC
- Published in
- IEC 61360-4
- Responsible committee
- IEC/SC 3D
- Change request
C00115- Dates
- Original: 2010-11-11
- Current version: 2010-11-11
- Current revision: 2023-04-17
Full source data#
Every key from the original .xls export, including multilingual variants, status, publisher, committee, and workbook-specific codes.
Raw properties (19 keys from source .xls) — click to expand
- C002
- C00115
- C011
- IEC
- C012
- IEC 61360-4
- C016
- Standard
- MDC_P001_5
- 0112/2///61360_4#AAA423
- MDC_P002_1
- 1
- MDC_P002_2
- 5
- MDC_P003_0
- 2023-04-17
- MDC_P003_1
- 2010-11-11
- MDC_P003_2
- 2010-11-11
- MDC_P003_3
- 2023-04-17
- MDC_P004.en
- standard form
- MDC_P005.en
- T000
- MDC_P006.en
- dual-in-line package outline style with through-hole leads in standard form
- MDC_P008_1
- DAA024
- MDC_P010
- 0112/2///61360_4#AAA375
- MDC_P011
- ITEM_CLASS
- MDC_P012
- IEC/SC 3D
- MDC_P014
- {0112/2///61360_4#AAG001,0112/2///61360_4#AAG002,0112/2///61360_4#AAG003,0112/2///61360_4#AAG005,0112/2///61360_4#AAG008,0112/2///61360_4#AAG012,0112/2///61360_4#AAG013,0112/2///61360_4#AAG016,0112/2///61360_4#AAG017,0112/2///61360_4#AAG029,0112/2///61360_4#AAG036,0112/2///61360_4#AAG046,0112/2///61360_4#AAG051,0112/2///61360_4#AAG087,0112/2///61360_4#AAG088}
Version history6#
IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.