MUX ratiov1rev 52011-08-31
driving method
0112/2///61360_4#AAE839
code of addressing the liquid crystal display, i.e. the number of segments (with dot matrix displays, the picture elements or pixels) that are connected together, and is given in a ratio value
- Used by classes
- 1
Also appears in2#
Entities with the same name in other dictionaries:
- Code
AAE839- Data type
- ENUM_CODE_TYPE(0112/2///61360_4#ASA140)
Version history5#
IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.
All properties20#
- Version
- 1
- Revision
- 5
- Preferred name
- driving method
- Short name
- MUX ratio
- Definition
- code of addressing the liquid crystal display, i.e. the number of segments (with dot matrix displays, the picture elements or pixels) that are connected together, and is given in a ratio value
- Remark
- 1. The number of common electrodes or segments per group determines the multiplex ratio. When the number of segments is n and the multiplex ratio is M then the number of connections used is n/M + M against n + 1 for direct drive. |2. Multiplex drive is when several electrodes of the segments and those of the back-planes are connected together.
- Definition class
- 0112/2///61360_4#AAA001component
- Drawing reference
- M..12
- Responsible committee
- SC3D
- Publisher
- IEC
- Published in
- IEC 61360-4
- Published in
- NON_DEPENDENT_P_DET
- Status level
- Standard
- Version release date
- 2015-08-17
- Revision release date
- 2011-08-31
- Version initiation date
- 2015-08-17
- Original definition date
- 1996-08-01
- MDC_P001_6
- 0112/2///61360_4#AAE839driving method
- MDC_P022
- ENUM_CODE_TYPE(0112/2///61360_4#ASA140)
- MDC_P040
- A56