r_idv1rev 52011-08-31IEC 60748-3 (II.2.1.10) (1986)

differential input resistance

0112/2///61360_4#AAF163

minimum resistance between the inputs of a differential amplifier at reference conditions

Used by classes: 1

property

Also appears in1#

Entities with the same name in other dictionaries:

iec-61360-4AAF163Propertie

Code: AAF163
Data type: LEVEL(MIN) OF REAL_MEASURE_TYPE
Unit: UAA017 UAA017

Used by classes (1)

AAA007differential amplifier

Version history5#

IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.

All properties25#

Version: 1
Revision: 5
Preferred name: differential input resistance
Short name: r_id
Definition: minimum resistance between the inputs of a differential amplifier at reference conditions
Definition source: IEC 60748-3 (II.2.1.10) (1986)
Remark: In order to be able to consider the input impedance as a pure resistance, the measurement signal frequency must be sufficiently low so that there are no significant phase differences between the voltages at the input terminals of the amplifier to be measured with or without the series resistor.
Definition class: 0112/2///61360_4#AAA001component
Unit structure: Ω
Drawing reference: NR3..3.3ES2
Value format: {0112/2///61360_4#AAE995}
Initial value: 0112/2///62720#UAA017 UAA017
Responsible committee: SC3D
Publisher: IEC
Published in: IEC 61360-4
Published in: DEPENDENT_P_DET
Status level: Standard
Version release date: 2015-08-17
Revision release date: 2011-08-31
Version initiation date: 2015-08-17
Original definition date: 1996-08-01
MDC_P001_6: 0112/2///61360_4#AAF163differential input resistance
MDC_P022: LEVEL(MIN) OF REAL_MEASURE_TYPE
MDC_P025_1: r_id}
MDC_P040: E33