REG_L-Rv2rev 12015-12-21
load regulation ratio
0112/2///61360_4#AFD123
ratio calculated as the change in the output voltage divided by the set nominal input voltage, whilst the load current is varied with the input voltage being kept stable near the set nominal value of the device
- Used by classes
- 1
Also appears in1#
Entities with the same name in other dictionaries:
- Code
AFD123- Data type
- REAL_TYPE
Version history3#
IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.
All properties17#
- Version
- 2
- Revision
- 1
- Preferred name
- load regulation ratio
- Short name
- REG_L-R
- Definition
- ratio calculated as the change in the output voltage divided by the set nominal input voltage, whilst the load current is varied with the input voltage being kept stable near the set nominal value of the device
- Note
- NOTE 1 This property shows a capability of the regulator device to keep the output voltage constant despite a change in the load current.||NOTE 2 The change of voltage is measured corresponding to the change in the load current from that at maximum load time (thus minimum current) to that at minimum load (thus maximum current)time.||NOTE 3 The actual input voltage slightly differs from the set nominal value, due to the voltage dividing effect caused by the output load and an internal impedance, which is small but existing in an actual regulator device.
- Definition class
- 0112/2///61360_4#AFA019integrated circuit for power supply
- Value format
- {0112/2///61360_4#AFD148}
- Published in
- DEPENDENT_P_DET
- Status level
- Standard
- Version release date
- 2015-10-02
- Revision release date
- 2015-12-21
- Version initiation date
- 2015-12-21
- Change request ID
- C00050
- MDC_P022
- REAL_TYPE
- MDC_P025_1
- REG_L-R