Performance [10]
properties characterizing the performance of the device with regard to measurement accuracy and dynamic behaviour
Hierarchy#
Ancestors (top) → ABD973 (highlighted) → subclasses and powertype instances. Capped at 12 each; see the full lists in the sections below.
Higher level classes3#
Declared properties9#
time interval between the instant when the variation of an input variable is produced and the instant when the consequent variation of the output variable starts
time required to complete 63.2% of the total rise or decay of the output of a first-order linear system, initiated by a step or an impulse to the input
difference between consecutive upscale and downscale outputs for any single test cycle at the same input test point
finite range of values within reversal of the input variable does not produce any noticeable, change in the output variable
finite range of values within reversal of the input variable does not produce any noticeable, change in the output variable
for a step input signal and at rated supply pressure, time needed by a valve to reach 98% of rated travel to close
for a step input signal and at rated supply pressure, time needed by a valve to reach 98% of rated travel to open
for a step response, the maximum transient deviation from the final steady-state value of the output variable, expressed as a percentage of the difference between the final and the initial steady-state values
interval of time between initiation of an input signal step change and the moment that the, response of a dynamic reaches 86,5 % of its full steady-state value
Subclasses#
No subclasses
This class is a leaf — no other classes inherit from it.
Metadata#
- Source document
- from IEC 61987-1, 5.6
- Version
- 1
- Revision
- 2
- Status
- Standard
- Responsible committee
- SC65E – IEC 61987
- Change request
C00004- Dates
- Original: 2013-09-02
- Current version: 2013-09-02
- Current revision: 2014-06-18
Full source data#
Every key from the original .xls export, including multilingual variants, status, publisher, committee, and workbook-specific codes.
Raw properties (26 keys from source .xls) — click to expand
- C002
- C00004
- C016
- Standard
- C017.de
- 0
- C017.fr
- 0
- C018.de
- 2014-12-12
- C018.fr
- 2013-11-24
- C019.de
- Mr. W. Hartmann
- C019.fr
- Mr. W. Hartmann
- MDC_P001_5
- 0112/2///61987#ABD973
- MDC_P002_1
- 1
- MDC_P002_2
- 2
- MDC_P003_0
- 2018-03-28
- MDC_P003_1
- 2013-09-02
- MDC_P003_2
- 2013-09-02
- MDC_P003_3
- 2014-06-18
- MDC_P004.de
- Leistungsdaten [10]
- MDC_P004.en
- Performance [10]
- MDC_P004.fr
- Performance [10]
- MDC_P006_1
- from IEC 61987-1, 5.6
- MDC_P006.de
- Merkmale, die die Leistung des Geräts in Bezug auf Messgenauigkeit und dynamisches Verhalten kennzeichnen
- MDC_P006.en
- properties characterizing the performance of the device with regard to measurement accuracy and dynamic behaviour
- MDC_P006.fr
- propriétés caractérisant les performances de l’appareil en ce qui concerne l’exactitude de mesure et le comportement dynamique
- MDC_P010
- 0112/2///61987#ABV501
- MDC_P011
- ITEM_CLASS
- MDC_P012
- SC65E – IEC 61987
- MDC_P014
- {0112/2///61987#ABD594,0112/2///61987#ABD593,0112/2///61987#ABB000,0112/2///61987#ABB661,0112/2///61987#ABD560,0112/2///61987#ABD714,0112/2///61987#ABB079,0112/2///61987#ABD684,0112/2///61987#ABD560}
Version history2#
IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.