Dynamic behaviour [2]
properties characterizing the dynamic response of a device output
Hierarchy#
Ancestors (top) → ABE398 (highlighted) → subclasses and powertype instances. Capped at 12 each; see the full lists in the sections below.
Higher level classes3#
Declared properties13#
time duration for the output to reach and remain within the manufacturer's specified limits with a 90% input signal applied to the device
drift in output monitored for 30 days with a constant input signal of 90 % of span
time interval between the stepwise variation of the input variable und the instant, when the difference between the step response and their steady-state value is smaller than the transient value tolerance
time interval between the instant when the variation of an input variable is produced and the instant when the consequent variation of the output variable starts
for a step response, duration of the time interval between the instant when the output variable reaches a small, specified percentage of the difference between the final and the initial steady state vales and the instant when it reaches for the first time a large, specified percentage of the same steady state difference
time duration from a step change in the input signal to a system for the change in output of the system to reach for the first time 90% of its final steady state value
time required to complete 63.2% of the total rise or decay of the output of a first-order linear system, initiated by a step or an impulse to the input
time duration from a step change in the input signal to a system for the change in output of the system to reach for the first time 63% of its final steady state value
drift in zero or lower range-limit value monitored for 30 days with a constant input signal of 90% of span
time duration between two successive measurements
time of collection of data to produce a resulting mean value
for a step response, the maximum transient deviation from the final steady-state value of the output variable, expressed as a percentage of the difference between the final and the initial steady-state values
interval of time between initiation of an input signal step change and the moment that the, response of a dynamic reaches 86,5 % of its full steady-state value
Subclasses#
No subclasses
This class is a leaf — no other classes inherit from it.
Metadata#
- Version
- 1
- Revision
- 2
- Status
- Standard
- Responsible committee
- SC65E – IEC 61987
- Change request
C00009- Dates
- Current revision: 2014-06-18
Full source data#
Every key from the original .xls export, including multilingual variants, status, publisher, committee, and workbook-specific codes.
Raw properties (23 keys from source .xls) — click to expand
- C002
- C00009
- C016
- Standard
- C017.de
- 0
- C017.fr
- 0
- C018.de
- 2014-12-12
- C018.fr
- 2014-12-12
- C019.de
- Mr. W. Hartmann
- C019.fr
- Mr. W. Hartmann
- MDC_P001_5
- 0112/2///61987#ABE398
- MDC_P002_1
- 1
- MDC_P002_2
- 2
- MDC_P003_0
- 2018-03-28
- MDC_P003_3
- 2014-06-18
- MDC_P004.de
- Dynamisches Verhalten [2]
- MDC_P004.en
- Dynamic behaviour [2]
- MDC_P004.fr
- Comportement dynamique [2]
- MDC_P006.de
- Merkmale, die das dynamische Verhalten eines Geräteausgangs kennzeichnen
- MDC_P006.en
- properties characterizing the dynamic response of a device output
- MDC_P006.fr
- propriétés caractérisant la réponse dynamique d’une sortie d’appareil
- MDC_P010
- 0112/2///61987#ABV501
- MDC_P011
- ITEM_CLASS
- MDC_P012
- SC65E – IEC 61987
- MDC_P014
- {0112/2///61987#ABA569,0112/2///61987#ABB717,0112/2///61987#ABA570,0112/2///61987#ABA999,0112/2///61987#ABB000,0112/2///61987#ABB077,0112/2///61987#ABB078,0112/2///61987#ABD714,0112/2///61987#ABB550,0112/2///61987#ABB079,0112/2///61987#ABD684,0112/2///61987#ABB718,0112/2///61987#ABB719}
Version history2#
IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.