Accuracy expressed as a percentage [I/O module]
properties characterizing the accuracy of a measurement of an I/O module, expressed as a percentage of reading, span or full range etc.
Hierarchy#
Ancestors (top) → ABP013 (highlighted) → subclasses and powertype instances. Capped at 12 each; see the full lists in the sections below.
Higher level classes3#
Declared properties16#
algebraic difference between the extreme values obtained by a number of consecutive measurements of the output over a short period of time for the same value of the input under the same operating conditions, approaching from the same direction, for full range traverses
difference between consecutive upscale and downscale outputs for any single test cycle at the same input test point
finite range of values within which variation of the input variable does not produce any noticeable change in the output variable
basis for stating a percentage deadband
basis for stating a non-repeatability
non-linearity determined by drawing a straight line so that it coincides, with the average calibration curve at the upper range value and at the lower range value
non-linearity determined by drawing a straight line so that it coincides with, the average calibration curve at the lower range value (zero), and minimizes the maximum, deviation
non-linearity determined by drawing a straight line through the average, curve in such a way as to minimize the maximum deviation
non-conformity determined by drawing a straight line so that it coincides, with the average calibration curve at the upper range value and at the lower range value
non-conformity determined by drawing a straight line so that it coincides with, the average calibration curve at the lower range value (zero), and minimizes the maximum, deviation
non-conformity determined by drawing a straight line through the average, curve in such a way as to minimize the maximum deviation
classification of a non-linearity/non-conformity statement based on the method used to determine inaccuracy according to IEC 61298-2:2008, 4.1.8
quality which characterizes the ability of a measuring instrument to provide an indicated value close to a true value of the measurand expressed as a percentage of reading, span or full range etc. under reference conditions
basis for stating an accuracy expressed as percentage
probability, generally expressed as a percentage, that the true value of a statistically estimated quantity falls within a pre-established interval about the estimated value
ABP238ref. Influence of external quantities expressed as a percentage [I/O module]CLASS_REFERENCE_TYPE(0112/2///61987#ABP034)reference to block ABP034
Subclasses#
No subclasses
This class is a leaf — no other classes inherit from it.
Metadata#
- Version
- 1
- Revision
- 1
- Status
- Standard
- Publisher
- IEC
- Published in
- IEC 61987
- Responsible committee
- IEC/SC 65E
- Change request
C00128- Dates
- Original: 2023-01-23
- Current version: 2023-01-23
- Current revision: 2023-01-23
Full source data#
Every key from the original .xls export, including multilingual variants, status, publisher, committee, and workbook-specific codes.
Raw properties (23 keys from source .xls) — click to expand
- C002
- C00128
- C011
- IEC
- C012
- IEC 61987
- C016
- Standard
- C017.de
- 0
- C018.de
- 2021-11-23
- C019.de
- Mr. W. Hartmann
- MDC_P001_5
- 0112/2///61987#ABP013
- MDC_P002_1
- 1
- MDC_P002_2
- 1
- MDC_P003_0
- 2023-01-23
- MDC_P003_1
- 2023-01-23
- MDC_P003_2
- 2023-01-23
- MDC_P003_3
- 2023-01-23
- MDC_P004.de
- Genauigkeit in relativen Einheiten [I/O-Modul]
- MDC_P004.en
- Accuracy expressed as a percentage [I/O module]
- MDC_P006.de
- Merkmale, die die Genauigkeit einer Messung eines I/O-Moduls, ausgedrückt als relativer Wert bezogen auf den Messwert, die Messspanne, die maximale Messspanne usw. kennzeichnen
- MDC_P006.en
- properties characterizing the accuracy of a measurement of an I/O module, expressed as a percentage of reading, span or full range etc.
- MDC_P010
- 0112/2///61987#ABV501
- MDC_P011
- ITEM_CLASS
- MDC_P012
- IEC/SC 65E
- MDC_P014
- {0112/2///61987#ABD459,0112/2///61987#ABD460,0112/2///61987#ABD535,0112/2///61987#ABA568,0112/2///61987#ABB779,0112/2///61987#ABB801,0112/2///61987#ABB802,0112/2///61987#ABB803,0112/2///61987#ABB804,0112/2///61987#ABB805,0112/2///61987#ABB806,0112/2///61987#ABB846,0112/2///61987#ABB661,0112/2///61987#ABB662,0112/2///61987#ABB663,0112/2///61987#ABP238}
- MDC_P019
- false
Version history1#
IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.