Joy stick
control switch having an actuator consisting of a pin or stick projecting essentially at a right angle from the panel or enclosure when in one of its positions and intended to be operated by angular displacement
Hierarchy#
Ancestors (top) → ACC520 (highlighted) → subclasses and powertype instances. Capped at 12 each; see the full lists in the sections below.
Higher level classes3#
Declared properties7#
information necessary for unambiguous identification of the device
terminals, screws or other parts, used for the electrical connection of conductors of external circuits of a control device
physical information of the device for installation
general technical aspects of the joy stick
all the conductive parts of the joy stick which are intended to be included in a circuit other than the main circuit
part which contains and support the actuator or contains the lens of an indicator light, fixed on an enclosure or on the body of the joy stick
conformity of a device with specified requirements and compliance with recognised product standards
Subclasses#
No subclasses
This class is a leaf — no other classes inherit from it.
Metadata#
- Synonyms
- Joystick controller
- Note
- NOTE 1 A joy stick may have more than two positions associated with different directions of the displacement of the stick and operating the contact elements differently: such a joy stick is referred to as a joy stick selector., NOTE 2 The pin or stick may or may not have a spring return.
- Source document
- 2.2.2.19 of IEC 60947-5-1: 2016
- Version
- 1
- Revision
- 3
- Status
- Standard
- Publisher
- IEC
- Published in
- IEC 62683-1:2017
- Responsible committee
- IEC SC121A
- Change request
C00146- Dates
- Original: 2012-09-27
- Current version: 2016-09-16
- Current revision: 2020-01-11
Full source data#
Every key from the original .xls export, including multilingual variants, status, publisher, committee, and workbook-specific codes.
Raw properties (40 keys from source .xls) — click to expand
- C002
- C00146
- C011
- IEC
- C012
- IEC 62683-1:2017
- C016
- Standard
- C017.de
- 2
- C017.fr
- 1
- C017.zh
- 1
- C018.de
- 2017-11-06
- C018.fr
- 2020-01-11
- C018.zh
- 2017-09-26
- C019.de
- DKE, Andreas Boeumler
- C019.fr
- IEC 121A/WG 17
- C019.zh
- SAC, Li Hui
- MDC_P001_5
- 0112/2///62683#ACC520
- MDC_P002_1
- 1
- MDC_P002_2
- 3
- MDC_P003_0
- 2020-01-11
- MDC_P003_1
- 2012-09-27
- MDC_P003_2
- 2016-09-16
- MDC_P003_3
- 2020-01-11
- MDC_P004.de
- Meisterschalter
- MDC_P004.en
- Joy stick
- MDC_P004.fr
- Manipulateur
- MDC_P004.zh
- 操纵杆
- MDC_P006_1
- 2.2.2.19 of IEC 60947-5-1: 2016
- MDC_P006.de
- Hilfsstromschalter mit einem Steuerknüppel als Bedienteil; Letzterer steht in einer seiner Stellungen senkrecht zur Schalttafel oder dem Gehäuse und wird durch Winkeländerung betätigt
- MDC_P006.en
- control switch having an actuator consisting of a pin or stick projecting essentially at a right angle from the panel or enclosure when in one of its positions and intended to be operated by angular displacement
- MDC_P006.fr
- auxiliaire de commande muni d'un organe de commande consistant en une tige, sensiblement perpendiculaire au panneau ou à l'enveloppe lorsqu'elle se trouve dans l'une de ses positions, destinée à être actionnée par déplacement angulaire
- MDC_P006.zh
- 具有用操作柄或操作杆所组成的操动器的控制开关，当其处于某一位置时，操作柄或操作杆与面板或外壳间成一直角向外伸出，且用角位移法进行操作。
- MDC_P007.en
- Joystick controller
- MDC_P007.fr
- Auxiliaire à tige guidée
- MDC_P008.de
- ANMERKUNG 1 Ein Meisterschalter darf mehr als zwei Betätigungsstellungen haben, die verschiedenen Betätigungsrichtungen zugeordnet sind, und die Schaltglieder unterschiedlich betätigen: Solch ein Meisterschalter wird als Wahlmeisterschalter bezeichnet., ANMERKUNG 2 Der Steuerknüppel darf eine Kraftspeicherrückstellung (Feder) haben.
- MDC_P008.en
- NOTE 1 A joy stick may have more than two positions associated with different directions of the displacement of the stick and operating the contact elements differently: such a joy stick is referred to as a joy stick selector., NOTE 2 The pin or stick may or may not have a spring return.
- MDC_P008.fr
- NOTE 1 Un auxiliaire à tige guidée peut avoir plus de deux positions associées à différentes directions de déplacement de la tige et manœuvrant les éléments de contact de façons différentes; un tel auxiliaire à tige de manœuvre est appelé commutateur à tige., NOTE 2 La tige peut posséder ou ne pas posséder un ressort de rappel.
- MDC_P008.zh
- 注1：一个操纵杆可能有两个以上的位置对应不同的方向位移，对触头元件进行不同的操作：这样的操作杆被称为操作杆选择器。, 注2：销或棒可能会或可能不会有弹簧复位。
- MDC_P010
- 0112/2///62683#ACC500
- MDC_P011
- ITEM_CLASS
- MDC_P012
- IEC SC121A
- MDC_P014
- {0112/2///62683#ACF001,0112/2///62683#ACF242,0112/2///62683#ACF243,0112/2///62683#ACF244,0112/2///62683#ACF146,0112/2///62683#ACF058,0112/2///62683#ACF701}
- MDC_P019
- true
Version history2#
IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.