Dimensions of the assembly
physical characteristics of the assembly related to its space occupancy for operation and maintenance
- Inherited
- 20
Hierarchy#
Ancestors (top) → ACG050 (highlighted) → subclasses and powertype instances. Capped at 12 each; see the full lists in the sections below.
Higher level classes3#
Declared properties8#
height of the body of the assembly in the y-direction
length of the body of the assembly in the x-direction
breadth of the body of the assembly in the z-direction
length of the area on the right of the implemented object, dimensioned along its x-axis in the installation plan, necessary for its operation
depth of the area behind of the implemented object, dimensioned along its z-axis in the installation plan, necessary for its operation
height of the area above the implemented object, dimensioned along its y-axis in the installation plan, necessary for its operation
length of the area on the left side of the implemented object, dimensioned along its x-axis in the installation plan, necessary for its operation
depth of the area in front of the implemented object, dimensioned along its z-axis in the installation plan, necessary for its operation
Inherited properties (20) — click to expand
value of the mass of the product with all fixed parts
vertical distance in the y-direction between the top and bottom of the product, when standing in its normal use or conventional position, with the exclusion of its flexible parts
horizontal distance in the x-direction between the left and right sides of the product when standing in its normal use or conventional position, with the exclusion of its flexible parts
horizontal distance in the z-direction between the front and back of the product when standing in its normal use or conventional position, or the distance from end to end of a long and thin object, with the exclusion of its flexible parts
capability of the device to be mounted onto standard rail
capability of the device to be mounted on a panel
capability of the device to be mounted on a door
width of the body of the product measured at the point of its maximum cross-section
condition of mounting position of the sensor related to its sensing side
basic exterior form of the device
how to attach or integrate the block to the device
standardized dimensions, fixing points and characteristics of the housing
type of mounting of the device on a support
mounting of an additional side cover necessary for completing the assembly
device equipped with a cover which protects the actuator
means of connecting the shaft to a rotating object
method of attaching the plate to its supporting surface
total length of the body of the shaft
possibility to adjust the length of the device
connecting element between operating means and switching device
Imported properties1#
Subclasses#
No subclasses
This class is a leaf — no other classes inherit from it.
Is case of (powertype parents)1#
Metadata#
- Version
- 2
- Revision
- 1
- Status
- Standard
- Publisher
- IEC
- Published in
- IEC 62683-2-2:2025
- Responsible committee
- IEC/TC 121
- Change request
C00184- Dates
- Original: 2023-11-27
- Current version: 2026-01-30
- Current revision: 2026-01-30
Full source data#
Every key from the original .xls export, including multilingual variants, status, publisher, committee, and workbook-specific codes.
Raw properties (25 keys from source .xls) — click to expand
- C002
- C00184
- C011
- IEC
- C012
- IEC 62683-2-2:2025
- C016
- Standard
- C017.fr
- 1
- C018.fr
- 11/27/2023
- C019.fr
- IEC TC 121/WG 3
- MDC_P001_5
- 0112/2///62683#ACG050
- MDC_P002_1
- 2
- MDC_P002_2
- 1
- MDC_P003_0
- 2026-01-30
- MDC_P003_1
- 2023-11-27
- MDC_P003_2
- 2026-01-30
- MDC_P003_3
- 2026-01-30
- MDC_P004.en
- Dimensions of the assembly
- MDC_P004.fr
- Dimensions de l'ensemble
- MDC_P006.en
- physical characteristics of the assembly related to its space occupancy for operation and maintenance
- MDC_P006.fr
- caractéristiques physiques de l'ensemble liées à son occupation de l'espace pour son exploitation et sa maintenance
- MDC_P010
- 0112/2///62683#ACG000
- MDC_P011
- ITEM_CLASS
- MDC_P012
- IEC/TC 121
- MDC_P013
- {0112/2///62683#ACC066}
- MDC_P014
- {0112/2///62683#ACE911,0112/2///62683#ACE912,0112/2///62683#ACE913,0112/2///62683#ACE919,0112/2///62683#ACE920,0112/2///62683#ACE921,0112/2///62683#ACE922,0112/2///62683#ACE923}
- MDC_P019
- false
- MDC_P090
- {0112/2///62683#ACE808}
Version history4#
IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.