classITEM_CLASSv1rev 12025-06-10

Main circuit (of a switching device)

0112/2///62683#ACG183

all the conductive parts of a cam-switch included in the circuit which it is designed to close or open

Properties: 0
Subclasses: 0
Inherited: 124

Hierarchy#

Ancestors (top) → ACG183 (highlighted) → subclasses and powertype instances. Capped at 12 each; see the full lists in the sections below.

Higher level classes3#

Declared properties#

No declared properties

This class does not declare any properties of its own.

Inherited properties (124) — click to expand

ACE401number of polesINT_TYPE

number of electrically separated conducting paths of the main circuit of a switching device

ACE624number of selectable positionsINT_TYPE

number of steps in which the handle can be positioned

ACE445number of layers, minimumINT_TYPE

lowest number of isolated sets of contacts that represent either normally open, normally closed, change over or cross-over function for which the device is intended

ACE446number of layers, maximumINT_TYPE

greatest number of isolated sets of contacts that represent either normally open, normally closed, change over or cross-over function for which the device is intended

ACE449step angleENUM_STRING_TYPE

number of degrees between each defined position of the device

ACE456with OFF-positionENUM_BOOLEAN_TYPE

availability of a defined position in which all contacts are open

ACE461return to OFF-positionENUM_BOOLEAN_TYPE

availability of at least one defined position in which the device returns to a position in which all contacts are open

ACE513number of contacts, normally open, early makeINT_TYPE

number of contact elements, included in a control circuit or an auxiliary circuit and mechanically operated by the switching device or the actuator, which close before any normally open contact

ACE483contact sequenceENUM_STRING_TYPE

relation between the different operator positions versus the status of the association of contact sets in series or parallel operations

ACE424rated currentLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum uninterrupted current equal to the conventional free-air thermal current (lth)

ACE476rated operational current, AC-21, 230 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-21, at a rated operational voltage of 230 V a.c.

ACE471rated operational current, AC-21, 400 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-21, at a rated operational voltage of 400 V a.c.

ACE472rated operational current, AC-21, 690 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-21, at a rated operational voltage of 690 V a.c.

ACE477rated operational current, AC-22, 230 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-22, at a rated operational voltage of 230 V a.c.

ACE432rated operational current, AC-22, 400 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-22, at a rated operational voltage of 400 V a.c.

ACE473rated operational current, AC-22, 690 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-22, at a rated operational voltage of 690 V a.c.

ACE475rated operational voltage, AC-22LEVEL(MAX) OF INT_MEASURE_TYPE

maximum value of the AC voltage at which the switching device is intended to operate under the condition of the utilisation category AC-22

ACE457rated operational voltage, a.c.LEVEL(MAX) OF INT_MEASURE_TYPE

maximum value of the AC voltage at which the switching device is intended to operate

ACE478rated operational current, AC-23, 230 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-23, at a rated operational voltage of 230 V a.c.

ACE435rated operational current, AC-23, 400 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-23, at a rated operational voltage of 400 V a.c.

ACE474rated operational current, AC-23, 690 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-23, at a rated operational voltage of 690 V a.c.

ACE502rated operational current, AC-15, 230 VREAL_MEASURE_TYPE

value of current at which the contact is intended to operate, under the conditions of utilization category AC-15, at a rated operational voltage of 230 V a.c.

ACE433rated operational current, AC-1, 230 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-1, at a rated operational voltage of 230 V a.c.

ACE412rated operational power, AC-3, 230 VREAL_MEASURE_TYPE

value of power of the load that the switching device is intended to control under the conditions of utilization category AC-3 at a rated operational voltage of 230 V a.c.

ACE413rated operational power, AC-3, 400 VREAL_MEASURE_TYPE

value of power of the load that the switching device is intended to control under the conditions of utilization category AC-3 at a rated operational voltage of 400 V a.c.

ACE503rated operational current, DC-13, 24 VREAL_MEASURE_TYPE

value of current at which the contact is intended to operate, under the conditions of utilization category DC-13, at a rated operational voltage of 24 V d.c.

ACE479rated operational current, DC-21REAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category DC-21

ACE480rated operational voltage, DC-21LEVEL(MAX) OF REAL_MEASURE_TYPE

maximum value of the DC voltage at which the switching device is intended to operate under the condition of the utilisation category DC-21

ACE426rated operational current, DC-22REAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category DC-22

ACE459rated operational voltage, DC-22LEVEL(MAX) OF INT_MEASURE_TYPE

maximum value of the DC voltage at which the switching device is intended to operate under the condition of the utilisation category DC-22

ACE481rated operational current, DC-23REAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category DC-23

ACE482rated operational voltage, DC-23LEVEL(MAX) OF REAL_MEASURE_TYPE

maximum value of the d.c. voltage at which the switching device is intended to operate under the condition of the utilisation category DC-23

ACE463category of operating cyclesENUM_STRING_TYPE

additional letter to the utilisation category code giving the distinction between frequent (A) and infrequent operation (B)

ACE4431 ph. horsepower rating, 120 V, 60 HzREAL_MEASURE_TYPE

value of power of the single-phase motor load that the switching device is intended to control under the specified conditions at a rated operational voltage of 120 V 60 Hz

ACE4183 ph. horsepower rating, 460 V, 60 HzREAL_MEASURE_TYPE

value of power of the three-phase motor load that the switching device is intended to control under the specified conditions at a rated operational voltage of 460 V 60 Hz

ACE4193 ph. horsepower rating, 575 V, 60 HzREAL_MEASURE_TYPE

value of power of the three-phase motor load that the switching device is intended to control under the specified conditions at a rated operational voltage of 575 V 60 Hz

ACE439conventional enclosed thermal currentREAL_MEASURE_TYPE

current stated by the manufacturer used for the temperature-rise tests of the equipment when mounted in a specified enclosure

ACE440ambient air temperatureLEVEL(MIN,MAX) OF REAL_MEASURE_TYPE

operating temperature limits, determined under prescribed conditions, of the air surrounding the complete switching device

ACE460rated impulse withstand voltageREAL_MEASURE_TYPE

value stated for the transient overvoltage occurring in the circuit in which the equipment is fitted

ACE455rated operational voltageLEVEL(MIN,MAX) OF INT_MEASURE_TYPE

range of voltage combined with a rated operational current intended to be switched by the device under specified conditions

ACE410number of protected polesINT_TYPE

number of poles protected under over-current condition

ACE453fuse systemSTRING_TYPE

family of fuses following the same physical design principles with respect to the shape of the fuse-links, type of contact, etc. EXAMPLE: NH, BS, NF, H

ACE452characteristic of the fuse-linkSTRING_TYPE

code composed of one or more letters: The breaking range followed by the utilization category, and if needed, the time delay class EXAMPLE: gG, aM, gN class J ,gN class CC

ACE454size of the fuse-linkSTRING_TYPE

specified set of dimensions of fuses within a fuse system, each individual size covering a given range of rated currents for which the specified dimensions of the fuses remain unchanged EXAMPLE: 00, 10 x 38 mm, 0,405 x 1,5 in

ACE438conventional free air thermal currentLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum current carried continuously by unenclosed equipment in free air without the temperature rise of the various parts exceeding the limits specified

ACE429rated operational current, 400 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, at a rated operational voltage of 400 V a.c.

ACE434rated operational current, AC-3, 400 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-3, at a rated operational voltage of 400 V a.c.

ACE430rated operational current, 40 °CREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the specified conditions, at the ambient temperature of 40 °C

ACE416rated operational power, delta connected motor, 230 V, 40 °CREAL_MEASURE_TYPE

value of power of the three-phase motor load connected in delta that the switching device is intended to control under the specified conditions at a rated operational voltage of 230 V a.c. and at 40 °C

ACE417rated operational power, delta connected motor, 400 V, 40 °CREAL_MEASURE_TYPE

value of power of the three-phase motor load connected in delta that the switching device is intended to control under the specified conditions at a rated operational voltage of 400 V a.c. and at 40 °C

ACE4203 ph. horsepower rating, 460 V, 60 Hz, delta connected motorREAL_MEASURE_TYPE

value of power of the three-phase motor load connected in delta that the switching device is intended to control under the specified conditions at a rated operational voltage of 460 V 60 Hz

ACE4213 ph. horsepower rating, 575 V, 60 Hz, delta connected motorREAL_MEASURE_TYPE

value of power of the three-phase motor load connected in delta that the switching device is intended to control under the specified conditions at a rated operational voltage of 575 V 60 Hz

ACE414rated operational power, line connected motor, 230 V, 40 °CREAL_MEASURE_TYPE

value of power of the three-phase motor load connected in star that the switching device is intended to control under the specified conditions at a rated operational voltage of 230 V a.c. and at 40 °C

ACE415rated operational power, line connected motor, 400 V, 40 °CREAL_MEASURE_TYPE

value of power of the three-phase motor load connected in star that the switching device is intended to control under the specified conditions at a rated operational voltage of 400 V a.c. and at 40 °C

ACE4223 ph. horsepower rating, 460 V, 60 Hz, line connected motorREAL_MEASURE_TYPE

value of power of the three-phase motor load connected in star that the switching device is intended to control under the specified conditions at a rated operational voltage of 460 V 60 Hz

ACE4233 ph. horsepower rating, 575 V, 60 Hz, line connected motorREAL_MEASURE_TYPE

value of power of the three-phase motor load connected in star that the switching device is intended to control under the specified conditions at a rated operational voltage of 575 V 60 Hz

ACE403number of main contacts, normally closedINT_TYPE

number of contacts included in the main circuit of a mechanical switching device, intended to carry, in the closed position, the current of the main circuit, for which the force for opening the contacts is provided by an electromagnet

ACE404number of main contacts, normally openINT_TYPE

number of contacts included in the main circuit of a mechanical switching device, intended to carry, in the closed position, the current of the main circuit, for which the force for closing the contacts is provided by an electromagnet

ACE442rated operational current, AC-3, 230 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-3, at a rated operational voltage of 230 V a.c.

ACE431rated operational current, AC-1, 400 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-1, at a rated operational voltage of 400 V a.c.

ACE405rated operational power, AC-6b, 400 VREAL_MEASURE_TYPE

value of power of the load that the switching device is intended to control under the conditions of utilization category AC-6b at a rated operational voltage of 400 V a.c.

ACE464rated operational power, AC-6b, 230 VREAL_MEASURE_TYPE

value of power of the load that the switching device is intended to control under the conditions of utilization category AC-6b at a rated operational voltage of 230 V a.c.

ACE406rated operational power, capacitive switching, 460 V, 60 HzREAL_MEASURE_TYPE

value of power of the capacitive load that the switching device is intended to control under the specified conditions at a rated operational voltage of 460 V, 60 Hz

ACE402rated operational power, capacitive switching, 575 V, 60 HzREAL_MEASURE_TYPE

value of power of the capacitive load that the switching device is intended to control under the specified conditions at a rated operational voltage of 575 V, 60 Hz

ACE407rated operational power, DC-1, 440 VREAL_MEASURE_TYPE

value of power of the load that the switching device is intended to control under the conditions of utilization category DC-1 at a rated operational voltage of 440 V d.c.

ACE465rated operational power, DC-1, 220 VREAL_MEASURE_TYPE

value of power of the load that the switching device is intended to control under the conditions of utilization category DC-1 at a rated operational voltage of 220 V d.c.

ACE408rated operational power, DC-3, 440 VREAL_MEASURE_TYPE

value of power of the load that the switching device is intended to control under the conditions of utilization category DC-3 at a rated operational voltage of 440 V d.c.

ACE470rated operational power, DC-3, 220 VREAL_MEASURE_TYPE

value of power of the load that the switching device is intended to control under the conditions of utilization category DC-3 at a rated operational voltage of 220 V d.c.

ACE409rated operational power, DC-5, 440 VREAL_MEASURE_TYPE

value of power of the load that the switching device is intended to control under the conditions of utilization category DC-5 at a rated operational voltage of 440 V d.c.

ACE466rated operational power, DC-5, 220 VREAL_MEASURE_TYPE

value of power of the load that the switching device is intended to control under the conditions of utilization category DC-5 at a rated operational voltage of 220 V d.c.

ACE425rated operational current, DC-1, 440 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category DC-1, at a rated operational voltage of 440 V d.c.

ACE467rated operational current, DC-1, 220 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category DC-1, at a rated operational voltage of 220 V d.c.

ACE427rated operational current, DC-3, 440 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category DC-3, at a rated operational voltage of 440 V d.c.

ACE468rated operational current, DC-3, 220 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category DC-3, at a rated operational voltage of 220 V d.c.

ACE428rated operational current, DC-5, 440 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category DC-5, at a rated operational voltage of 440 V d.c.

ACE469rated operational current, DC-5, 220 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category DC-5, at a rated operational voltage of 220 V d.c.

ACE739thermal memoryENUM_BOOLEAN_TYPE

ability of an overload protection for which the thermal time/current characteristic is not reset after the interruption of the current

ACE436rated operational current, AC-7a, 230 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-7a, at a rated operational voltage of 230 V a.c.

ACE437rated operational current, AC-7b, 230 VREAL_MEASURE_TYPE

value of current at which the switching device is intended to operate, under the conditions of utilization category AC-7b, at a rated operational voltage of 230 V a.c.

ACE444rated voltageLEVEL(MAX) OF INT_MEASURE_TYPE

voltage assigned by the manufacturer for a specified operating condition of an accessory

ACE447number of mechanical operating cyclesINT_TYPE

number of no-load operating cycles without impairing the specified performance of the device

ACE450rated power dissipation of a fuse terminal blockREAL_MEASURE_TYPE

maximum permissible value with which the fuse terminal block can be continuously loaded by the cartridge fuse-link under specified conditions

ACE451signal indicatorENUM_BOOLEAN_TYPE

device associated with a switch to indicate the circuit state visually

ACE511number of auxiliary contacts, normally openINT_TYPE

number of contact elements, included in a control circuit or an auxiliary circuit and mechanically operated by the switching device or the actuator, which close when actuated

ACE512number of auxiliary contacts, normally open, additionalINT_TYPE

maximum number of contact elements, included in a control circuit or an auxiliary circuit and mechanically operated by the switching device or the actuator, which close when actuated, available as options

ACE508number of auxiliary contacts, normally closedINT_TYPE

number of contact elements, included in a control circuit or in an auxiliary circuit and mechanically operated by the switching device, which open when actuated

ACE509number of auxiliary contacts, normally closed, additionalINT_TYPE

maximum number of contact elements, included in a control circuit or an auxiliary circuit and mechanically operated by the switching device or the actuator, available as options

ACE514number of auxiliary contacts, changeoverINT_TYPE

number of contact element combinations included in a control circuit or an auxiliary circuit and mechanically operated by the switching device or the actuator, each combination including one make contact element and one break contact element

ACE515number of auxiliary contacts, changeover, additionalINT_TYPE

maximum number of contacts element combinations included in a control circuit or an auxiliary circuit and mechanically operated by the switching device or the actuator, available as options, each combination including one make contact element and one break contact element

ACE602rated control voltage, a.c., 50 HzLEVEL(MIN,MAX) OF INT_MEASURE_TYPE

range of r.m.s. rated voltage at the frequency of 50 Hz applied to the control circuit or its supply

ACE604rated control voltage, a.c., 60 HzLEVEL(MIN,MAX) OF INT_MEASURE_TYPE

range of r.m.s. rated voltage at the frequency of 60 Hz applied to the control circuit or its supply

ACE606rated control voltage, d.c.LEVEL(MIN,MAX) OF INT_MEASURE_TYPE

range of DC rated voltage applied to the control circuit or its supply

ACE521motor-operator closing timeREAL_MEASURE_TYPE

time elapsed between the energisation of the motor operator and the closing of the main contacts of the device

ACE522motor-operator opening timeREAL_MEASURE_TYPE

time elapsed between the energisation of the motor operator and the opening of the main contacts of the device

ACE601kind of currentENUM_STRING_TYPE

kind of electric current supply

ACE608compatible with PLC outputsENUM_BOOLEAN_TYPE

rated control supply voltage and current of the device compatible with the digital output characteristics of a PLC

ACE531supply voltage limitLEVEL(MIN,MAX) OF REAL_MEASURE_TYPE

range of supply voltage of a device including supply tolerances, from the lower limit to the upper limit

ACE532rated supply frequencyENUM_STRING_TYPE

frequency of the supply assigned to a device by the manufacturer for a specified operating condition

ACE533rated operational current, a.c.LEVEL(MIN,MAX) OF INT_MEASURE_TYPE

range of current combined with an AC rated operational voltage intended to be switched by the device under specified conditions

ACE534rated operational current, d.c.LEVEL(MIN,MAX) OF INT_MEASURE_TYPE

range of current combined with a DC rated operational voltage intended to be switched by the device under specified conditions

ACE537OFF-state currentREAL_MEASURE_TYPE

the current which flows through the load circuit of the proximity switch in the OFF-state

ACE538ON-state current, minimumLEVEL(MIN) OF REAL_MEASURE_TYPE

minimum current necessary to maintain the ON-state conduction of the switching element

ACE539voltage dropREAL_MEASURE_TYPE

voltage measured across the switching element when carrying the operational current flow under specified conditions.

ACE540overload and short circuit protected outputENUM_BOOLEAN_TYPE

device output protected against overload and short-circuits of the connected load

ACE516contact element action typeENUM_STRING_TYPE

type of driving a contact element of a control device in which the velocity of contact motion is dependent or not of the velocity of motion of the actuator

ACE518number of contacts, normally closedINT_TYPE

number of contact elements which open when actuated

ACE519number of contacts, normally openINT_TYPE

number of contact elements which close when actuated

ACE520number of contacts, changeoverINT_TYPE

number of contact element combinations, each combination including one make-contact element and one break contact element

ACE504contact rating designation, a.c.STRING_TYPE

electrical ratings based on a rated conventional enclosed thermal current, a maximum operational voltage and AC utilization categories

ACE505contact rating designation, d.c.STRING_TYPE

electrical ratings based on a rated conventional enclosed thermal current, a maximum operational voltage and DC utilization categories

ACE506rated operational current of low energy contact, d.c., minimumENUM_STRING_TYPE

value of the minimum DC current associated with declared reliability data at which the low energy contact is intended to operate at the specified rated operational voltage

ACE507rated operational voltage of low energy contact, d.c.ENUM_STRING_TYPE

value of the DC voltage associated with declared reliability data at which the low energy contact is intended to operate at the specified rated operational current

ACE517number of electrical operating cyclesINT_TYPE

number of on-load operating cycles which will be attained or exceeded by 90 % of all devices tested, without repair or replacement of any part

ACE510number of contacts, normally closed, late breakINT_TYPE

number of contact elements, included in a control circuit or an auxiliary circuit and mechanically operated by the switching device or the actuator, which open with a delay when actuated

ACE501rated operational current, AC-12REAL_MEASURE_TYPE

value of current at which the contact is intended to operate, under the conditions of utilization category AC-12

ACE541rated operational current, AC-14, 230 VREAL_MEASURE_TYPE

value of current at which the contact is intended to operate, under the conditions of utilization category AC-14, at a rated operational voltage of 230 V a.c.

ACE523suitable for use into a safety control functionENUM_BOOLEAN_TYPE

ability to be a part of a safety control system used to implement a safety function

ACE544type of analogue outputENUM_STRING_TYPE

current or voltage output signal which varies continuously depending on the sensing quantity

ACE545rated power (of a type of lamp)REAL_MEASURE_TYPE

value of the power of a given type of lamp declared by the manufacturer or the responsible vendor, the lamp being operated under specified conditions

ACE546time delay setting rangeLEVEL(MIN,MAX) OF REAL_MEASURE_TYPE

limits of the setting of the time delaying a control signal

ACE547triggering edgeENUM_STRING_TYPE

direction of the front edge of the signal initiating the function

ACE524number of step position of the pedalENUM_STRING_TYPE

number of operating positions of the switch depending on the positions of the foot

ACE542unlatching controlENUM_STRING_TYPE

method of releasing the latching mechanism

ACE548triggering inputENUM_STRING_TYPE

input signal used to initiate the function

Imported properties39#

39 / 39

Subclasses#

No subclasses

This class is a leaf — no other classes inherit from it.

Is case of (powertype parents)2#

Metadata#

Version: 1
Revision: 1
Status: Standard
Publisher: IEC
Published in: IEC 62683DB
Responsible committee: IEC/TC 121
Change request: C00136
Dates: Original: 2025-06-10
Current version: 2025-06-10
Current revision: 2025-06-10

Full source data#

Every key from the original .xls export, including multilingual variants, status, publisher, committee, and workbook-specific codes.

Raw properties (27 keys from source .xls) — click to expand

C002: C00136
C011: IEC
C012: IEC 62683DB
C016: Standard
C017.fr: 1
C018.fr: 2024-09-04
C019.fr: IEC/TC 121/WG 3
MDC_P001_5: 0112/2///62683#ACG183
MDC_P002_1: 1
MDC_P002_2: 1
MDC_P003_0: 2025-06-04
MDC_P003_1: 2025-06-10
MDC_P003_2: 2025-06-10
MDC_P003_3: 2025-06-10
MDC_P004.de: Hauptstromkreis (eines Schaltgeräts)
MDC_P004.en: Main circuit (of a switching device)
MDC_P004.fr: Circuit principal (d'un appareil de connexion)
MDC_P004.zh: （开关电器的）主电路
MDC_P006.en: all the conductive parts of a cam-switch included in the circuit which it is designed to close or open
MDC_P006.fr: ensemble des pièces conductrices d'un interrupteur à came insérées dans le circuit qu'il a pour fonction de fermer ou d'ouvrir
MDC_P010: 0112/2///62683#ACG000
MDC_P011: ITEM_CLASS
MDC_P012: IEC/TC 121
MDC_P013: {0112/2///62683#ACC014,0112/2///62683#ACC016}
MDC_P019: false
MDC_P033: {false}
MDC_P090: {0112/2///62683#ACE401,0112/2///62683#ACE624,0112/2///62683#ACE445,0112/2///62683#ACE446,0112/2///62683#ACE449,0112/2///62683#ACE456,0112/2///62683#ACE461,0112/2///62683#ACE513,0112/2///62683#ACE483,0112/2///62683#ACE424,0112/2///62683#ACE476,0112/2///62683#ACE471,0112/2///62683#ACE472,0112/2///62683#ACE477,0112/2///62683#ACE432,0112/2///62683#ACE473,0112/2///62683#ACE475,0112/2///62683#ACE457,0112/2///62683#ACE478,0112/2///62683#ACE435,0112/2///62683#ACE474,0112/2///62683#ACE502,0112/2///62683#ACE433,0112/2///62683#ACE412,0112/2///62683#ACE413,0112/2///62683#ACE503,0112/2///62683#ACE479,0112/2///62683#ACE480,0112/2///62683#ACE426,0112/2///62683#ACE459,0112/2///62683#ACE481,0112/2///62683#ACE482,0112/2///62683#ACE463,0112/2///62683#ACE443,0112/2///62683#ACE418,0112/2///62683#ACE419,0112/2///62683#ACE439,0112/2///62683#ACE440,0112/2///62683#ACE460}

Version history1#

IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.