Installation, mounting and dimensions
physical information of the shaft of operating handle for installation
- Inherited
- 20
Hierarchy#
Ancestors (top) → ACG286 (highlighted) → subclasses and powertype instances. Capped at 12 each; see the full lists in the sections below.
Higher level classes3#
Declared properties#
No declared properties
This class does not declare any properties of its own.
Inherited properties (20) — click to expand
total length of the body of the shaft
possibility to adjust the length of the device
connecting element between operating means and switching device
horizontal distance in the x-direction between the left and right sides of the product when standing in its normal use or conventional position, with the exclusion of its flexible parts
vertical distance in the y-direction between the top and bottom of the product, when standing in its normal use or conventional position, with the exclusion of its flexible parts
horizontal distance in the z-direction between the front and back of the product when standing in its normal use or conventional position, or the distance from end to end of a long and thin object, with the exclusion of its flexible parts
capability of the device to be mounted onto standard rail
value of the mass of the product with all fixed parts
capability of the device to be mounted on a panel
capability of the device to be mounted on a door
width of the body of the product measured at the point of its maximum cross-section
condition of mounting position of the sensor related to its sensing side
basic exterior form of the device
how to attach or integrate the block to the device
standardized dimensions, fixing points and characteristics of the housing
type of mounting of the device on a support
mounting of an additional side cover necessary for completing the assembly
device equipped with a cover which protects the actuator
means of connecting the shaft to a rotating object
method of attaching the plate to its supporting surface
Imported properties5#
Subclasses#
No subclasses
This class is a leaf — no other classes inherit from it.
Is case of (powertype parents)1#
Metadata#
- Version
- 1
- Revision
- 1
- Status
- Standard
- Publisher
- IEC
- Published in
- IEC 62683DB
- Responsible committee
- IEC SC121A
- Change request
C00081- Dates
- Original: 2017-05-12
- Current version: 2020-01-11
- Current revision: 2020-01-11
Full source data#
Every key from the original .xls export, including multilingual variants, status, publisher, committee, and workbook-specific codes.
Raw properties (33 keys from source .xls) — click to expand
- C002
- C00081
- C011
- IEC
- C012
- IEC 62683DB
- C016
- Standard
- C017.de
- 1
- C017.fr
- 1
- C017.zh
- 1
- C018.de
- 2017-12-05
- C018.fr
- 2020-01-11
- C018.zh
- 2018-05-30
- C019.de
- DKE, Andreas Boeumler
- C019.fr
- IEC 121A/WG 17
- C019.zh
- SAC, Li Hui
- MDC_P001_5
- 0112/2///62683#ACG286
- MDC_P002_1
- 1
- MDC_P002_2
- 1
- MDC_P003_0
- 2020-01-11
- MDC_P003_1
- 2017-05-12
- MDC_P003_2
- 2020-01-11
- MDC_P003_3
- 2020-01-11
- MDC_P004.de
- Installation, Einbau und Abmessung
- MDC_P004.en
- Installation, mounting and dimensions
- MDC_P004.fr
- Installation, montage et dimensions
- MDC_P004.zh
- 装配、安装和尺寸
- MDC_P006.de
- physikalische Information für den Einbau des Schafts des Bedienteils
- MDC_P006.en
- physical information of the shaft of operating handle for installation
- MDC_P006.fr
- informations physiques pour l’installation de l'axe de poignée de manœuvre
- MDC_P006.zh
- 操作手柄转轴的物理信息
- MDC_P010
- 0112/2///62683#ACG000
- MDC_P011
- ITEM_CLASS
- MDC_P012
- IEC SC121A
- MDC_P013
- {0112/2///62683#ACC066}
- MDC_P090
- {0112/2///62683#ACE819,0112/2///62683#ACE820,0112/2///62683#ACE821,0112/2///62683#ACE802,0112/2///62683#ACE801}
Version history1#
IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.