Connection facilities of the cable
description of the electrical connection of the cable of the connection assembly for sensor
- Inherited
- 36
Hierarchy#
Ancestors (top) → ACG318 (highlighted) → subclasses and powertype instances. Capped at 12 each; see the full lists in the sections below.
Higher level classes3#
Declared properties#
No declared properties
This class does not declare any properties of its own.
Inherited properties (36) — click to expand
material of the tubular covering of the cable
colour of the tubular covering of the cable
surrounding earthed metallic layer to confine the electric field within the cable and/or to protect the cable from external electrical influence
value of the length of the electrical connecting cable
diameter of the external circular cross section of the cable
number of independent conductive paths of the cable
value of the maximum cross-section of all connectable types of conductors, rigid (solid and stranded) and flexible, stated by the manufacturer, and to which certain thermal, mechanical and electrical requirements are referred
maximum cross-section expressed in AWG or kcmil size of all connectable types of conductors, rigid (solid and stranded) and flexible, stated by the manufacturer, and to which certain thermal, mechanical and electrical requirements are referred
the part(s) of the terminal necessary for the mechanical clamping and the electrical connection of the conductor(s), including the parts which are necessary to ensure the correct contact pressure
the part(s) of the terminal necessary for the mechanical clamping and the electrical connection of the conductor(s), including the parts which are necessary to ensure the correct contact pressure, second type integrated in the device
type of electrical connection of the main circuit of a device to the conductor suitable for the intended use
electrical connection and disconnection of a terminal can be performed without displacing the conductors of the corresponding circuit
type of electrical connection of auxiliary and/or control circuits of a device to the conductor suitable for the intended use
construction type enabling the device to be disconnected from the main circuit or to be removed
physical design of the electrical connection from the body of the sensor to the conductor suitable for the intended use
unit which plugs into a rack and is supported by guides
ACE863cross-section of flexible conductor in AWG or kcmil size, minimumENUM_CODE_TYPE(0112/2///61987#ABN524)minimum cross-sections of connectable flexible conductors in AWG or kcmil size, stated by the manufacturer, and to which some mechanical and electrical requirements are referred by the performed tests
ACE864cross-section of flexible conductor in AWG or kcmil size, maximumENUM_CODE_TYPE(0112/2///61987#ABN524)maximum cross-sections of connectable flexible conductors in AWG or kcmil size, stated by the manufacturer, and to which some mechanical and electrical requirements are referred by the performed tests
range of the cross-sections of connectable flexible conductors, stated by the manufacturer, and to which some mechanical and electrical requirements are referred by the performed tests
ACE866cross-section of rigid conductor in AWG or kcmil size, minimumENUM_CODE_TYPE(0112/2///61987#ABN524)minimum cross-sections of connectable rigid conductors in AWG or kcmil size, stated by the manufacturer, and to which some mechanical and electrical requirements are referred by the performed tests
range of the cross-sections of connectable rigid conductors, stated by the manufacturer, and to which some mechanical and electrical requirements are referred by the performed tests
orientation of the wire connection compared to the mounting surface of the device
orientation of the main circuit connections when the device is in preferred position of use
total number of clamping units supported by the terminal assembly
number of independent conductive paths of the device
number of openings in the housing necessary for the electrical connection
mechanical characteristic of the opening in the housing necessary for the electrical connection
ACE886cross-section of rigid conductor in AWG or kcmil size, maximumENUM_CODE_TYPE(0112/2///61987#ABN524)maximum cross-sections of connectable rigid conductors in AWG or kcmil size, stated by the manufacturer, and to which some mechanical and electrical requirements are referred by the performed tests
identification number of the conductor entry into the assembly
identification name of the conductor entry into the assembly
point of reference located at the extreme left (x axis), bottom (z axis) and rear (z axis) of the conductor entry
relative location of the part with openings which permit the passage of conductors into the assembly
dimension of the conductor entry from its reference point along axis "Z”
dimension of the conductor entry from its reference point along its axis "Y”
geometry of the of the part with openings which permit the passage of conductors into the assembly
dimension of the conductor entry from its reference point along its axis "X”
Imported properties8#
Subclasses#
No subclasses
This class is a leaf — no other classes inherit from it.
Is case of (powertype parents)1#
Metadata#
- Version
- 2
- Revision
- 1
- Status
- Standard
- Publisher
- IEC
- Published in
- IEC 62683DB
- Responsible committee
- IEC/TC 121
- Change request
C00122- Dates
- Original: 2017-05-12
- Current version: 2023-05-31
- Current revision: 2023-05-31
Full source data#
Every key from the original .xls export, including multilingual variants, status, publisher, committee, and workbook-specific codes.
Raw properties (34 keys from source .xls) — click to expand
- C002
- C00122
- C011
- IEC
- C012
- IEC 62683DB
- C016
- Standard
- C017.de
- 1
- C017.fr
- 1
- C017.zh
- 1
- C018.de
- 2017-12-05
- C018.fr
- 2022-04-11
- C018.zh
- 2018-05-30
- C019.de
- DKE, Andreas Boeumler
- C019.fr
- IEC/TC 121/WG 3
- C019.zh
- SAC, Li Hui
- MDC_P001_5
- 0112/2///62683#ACG318
- MDC_P002_1
- 2
- MDC_P002_2
- 1
- MDC_P003_0
- 2023-05-31
- MDC_P003_1
- 2017-05-12
- MDC_P003_2
- 2023-05-31
- MDC_P003_3
- 2023-05-31
- MDC_P004.de
- Anschlussmöglichkeiten der Leitung
- MDC_P004.en
- Connection facilities of the cable
- MDC_P004.fr
- Eléments de raccordement du câble
- MDC_P004.zh
- 电缆连接件
- MDC_P006.de
- Beschreibung der Art der elektrischen Verbindung der Leitung des Kabelanschlusssatzes für Sensor
- MDC_P006.en
- description of the electrical connection of the cable of the connection assembly for sensor
- MDC_P006.fr
- description du raccordement électrique du câble de l'assemblage de raccordement pour capteur
- MDC_P006.zh
- 传感器电缆连接组件的电气连接说明
- MDC_P010
- 0112/2///62683#ACG000
- MDC_P011
- ITEM_CLASS
- MDC_P012
- IEC/TC 121
- MDC_P013
- {0112/2///62683#ACC068}
- MDC_P019
- false
- MDC_P090
- {0112/2///62683#ACE859,0112/2///62683#ACE860,0112/2///62683#ACE878,0112/2///62683#ACE857,0112/2///62683#ACE868,0112/2///62683#ACE873,0112/2///62683#ACE862,0112/2///62683#ACE861}
Version history2#
IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.