car plug

code of the type of plug or jack intended for use in dc power applications

code of the type of plug or jack

minimum insulation resistance between the live and non-live parts of a switch, relay, transformer or connector

minimum creepage distance between live and non-live parts of a power transformer or connector

code of the entry of a connector

code of the pinning arrangement of a connector

code of the type of a connector, according to its shape, application, mating part or the type of component to which it will be permanently attached

code of the finish material of the contacts of a connector, relay or switch

code of the material of the housing or shell of a connector or switch

code of the angle between terminal and contact of a connector

IEC code of the type of the contact of a connector

code of the means by which polarisation of a connector is achieved

code of the material of the body of the contacts of a connector, relay or switch

code of the shape of the shell of a connector

code of the performance class of a connector

maximum continuous rms current per contact of a connector, at specified ambient temperature

total number of contacts of a connector

number of contact rows of a connector

minimum number of engagements and separations that the connector can withstand without electrical load

minimum opening in an edge connector to receive the metal-clad base material of a printed board including conductive layer or layers but excluding additional plating

nominal length of that part of a contact of a connector that is intended to make contact with the mating part

maximum resistance of a mated set of contacts of a connector, relay or switch

maximum force required to engage a connector with its mating part

minimum force required to separate a connector from its mating part

code of the locking device of a connector

nominal length of that part of a terminal of a right angle or 45 degree connector that is beside the housing

code of a component integrated with a connector

code of the material of the spring of the contacts of a connector, relay or switch

UL code of the flammability of a connector

IEC code of the flammability of a connector

UL code of the colour of a connector body

code of the type of a connector socket

number of contacts per row of a connector

value, as specified by the manufacturer, of the maximum allowed radius (in m) when bending a conductor or connector into a curve

code identifying the type and quality of the package surrounding a component

code identifying the method of fixing a component to its counterpart

code indicating the mounting means provided by a component

code identifying the finish of a housing or shell of a component

code indicating a component having or having not a contact for protective earth

upper category (ambient) temperature of a component

lower category (ambient) temperature of a component

degrees of protection provided by an enclosure against access to hazardous parts, ingress of solid foreign objects, ingress of water and to give additional information in connection with such protection (IP CODE)

nominal value of the rated voltage an EM component is designed for

nominal value of the rated impulse voltage an EM component is designed for

maximum value of the voltage proof an EM component is designed for

maximum value of the dielectric withstand voltage an EM component is designed for

value of the normal force which exists between engaged contact surfaces

value as specified by (minmax) of the conductor cross-section which is connectable to an electrical contact

value as specified by level (minmax) of the conductor diameter which is connectable to an electrical contact

value as specified by level (minmax) of the stripping length which is needed to connect a conductor to an electric contact

code identifying the standardized pollution degree an EM component can perform

code identifying the terminal arrangement of a connector

standardized code indicating the group of the insulating material an EM component is made from

value of the cross-sectional area of the maximum connectable conductor (rigid or flexible)

value of the cross-sectional area of the minimum connectable conductor (rigid or flexible)

code of the finish material of the terminal of an EM component

ability of a component to withstand specified severities of acceleration

ability of a component to withstand specified severities of shock

ability of a component to withstand specified severities of bump

code of the ability of a component to withstand specified severities of sinusoidal vibration in each of three mutually perpendicular directions

maximum panel thickness for which an EM component has been designed to be mounted

minimum panel thickness for which an EM component has been designed to be mounted

classifies an EM component whether it fits to the IEC 60512-20-1 requirements

classifies an EM component whether it fits to the IEC 60512-20-3 requirements

classifies an EM component whether it fits to the IEC 60512-20-2 requirements

minimum value of the length of the terminals of an electric-electronic or electromechanical component extending below the seating plane

value of the contact pitch of a connector in the x-direction

value of the contact pitch of a connector in the y-direction

code indicating the outer shape of a contact of a connector

Nominal value of the diameter of a round contact of a connector

Nominal value of the breadth of a rectangular contact of a connector

Nominal value of the thickness of a rectangular contact of a connector

value as specified by level (minmax) of the insulation diameter of a conductor which is possible to be connected to an electric contact

value of the minimum clearance between any contact of a connector and any material connected to the ground potential

value of the minimum clearance between any adjacent contact of a connector

value of the minimum creepage distance between any contact of a connector and any material connected to the ground potential

code of the material of a connector

code of the direction of the mounting of a connector with its mounting flange behind/in front of the mounting surface when looking at the mating face

code of the connectable cable type of a connector

code indicating the existence of a polarization

indication of the assessment level of a connector as specified in the appropriate specification

IEC code of the colour of a connector housing

maximum continuous rms current per contact of a connector, all contacts loaded, at specified ambient temperature

maximum force required to engage a connector with its mating part, excluding the effect of a coupling, locking or similar device

minimum force required to separate a connector from its mating part, excluding the effect of a coupling, locking or similar device

minimum mateable PCB thickness an edge connector is designed for, including all layers, cladding and surfacing

value of the angle between mating direction and the axis of a conductor or cable outlet of a connector

minimum to maximum distance by level minmax between the reference planes of the fixed and free connectors, within which the specified contact resistance will be met

code indicating the typical use of a connector

thickness of the PCB by level minmax a press-in terminal of a connector is designed for

code for the method of connecting a conductor to the contact of a connector

code for the method by which two parts of a connector are coupled or locked together

nominal distance between adjacent contacts in a row of a connector with contacts in a rectangular array

maximum voltage that may exist between any two contacts or between any contact and the shell or casing of a connector

maximum total current that may be carried by a connector

value as specified by level (miNomax) of the overall diameter of a connector with a circular or near-circular cross-section

code of the shape of the terminals of an electric, electronic or electromechanical component

code indicating the placement of the terminals of an electric-electronic or electromechanical component

value as specified by level (miNomax) of the diameter of the terminals of an electric-electronic or electromechanical component

nominal pitch of the terminals of an electric, electronic or electromechanical component

code of the category to which an electromechanical component belongs

value as specified by level (miNomax) of the length of the terminals of an electric-electronic or electromechanical component extending below the seating plane

BSI code of the shape/size of an electric-electronic or electromechanical component for placement on printed circuits

maximum rms current of an electric-electronic or electromechanical component at specified ambient temperature

maximum length of the body of an electric/ electronic or electromechanical component with axial leads, including the lacquered part of the leads

code of the terminal material of an electric-electronic or electromechanical component

number of electrical terminals of an electric/ electronic or electromechanical component

permissible temperature range at which the device may be stored without any voltage being applied

nominal pitch of the holes of an electric/electronic or electromechanical component parallel to the x coordinate

value as specified by level (miNomax) of the length of the flange of a component in the x-direction

value as specified by level (miNomax) of the height of the flange of an electric/electronic or electromechanical component

value as specified by level (miNomax) of the diameter of the body of an electric/electronic or electromechanical component

nominal pitch of the terminals of an electric/electronic or electromechanical component parallel to the x coordinate

nominal pitch of the terminals of an electric/electronic or electromechanical component parallel to the y coordinate

nominal diameter of the pitch circle of the terminals of an electric, electronic or electromechanical component

nominal breadth of the terminals of an electric, electronic or electromechanical component

nominal thickness of the terminals of an electric, electronic or electromechanical component

nominal offset of the terminals of an electric, electronic or electromechanical component parallel to the y coordinate

nominal offset of the terminals of an electric, electronic or electromechanical component parallel to the x coordinate

value as specified by level (miNomax) of the diameter of the flange of an electric/electronic or electromechanical component

code of the mounting method of an electric/electronic or electromechanical component

code indicating the exit position of the terminals of an electric/electronic or electromechanical component

code indicating the exit position of the terminals of electric/electronic or electromechanical components

code of the terminal shape of an electric/electronic or electromechanical component

code of the terminal shape of an electric/electronic or electromechanical component

number of holes in an electric, electronic or electromechanical component

code of the basic aspect of the shape of an electric/electronic or electromechanical component

number of studs on an electric/electronic or electromechanical component designed for fastening

number of pitches between the terminals of an electric/electronic or electromechanical component parallel to the x-coordinate

number of pitches between the terminals of an electric/electronic or electromechanical component parallel to the y-coordinate

CECC code of the specification in which an electric/ electronic or electromechanical component is released under the CECC quality assessment system

permissible power which may be dissipated continuously, at normal operating conditions

code of the main functional class to which a component belongs

value as specified by level (miNomax) of the outside diameter of a component with a body of circular cross-section

IEC code of the type of temperature indicating the specific part of a component, or its environment, to which it applies

temperature of a component, or its environment, as a variable

abbreviated name of the authority for quality certification of products

value as specified by level (miNomax) of the inside diameter of a component with a body of circular cross-section

minimum temperature applied to a component during cycle stress

maximum temperature applied to a component during cycle stress

nominal ambient free air temperature applied to a component during high temperature life test

nominal value of the ambient humidity relative to saturation humidity, applied to a component during humidity resistance stress

value as specified by level (miNomax) of the breadth of the flange of a component in the y-direction

code of the shape of the body of an electric/electronic or electromechanical component

code indicating the angle of vision on a component serving as standard for describing the component

one or more characters used to identify a specific terminal of a component

mark that indicates whether the terminal pairs or terminal groups of one function or one component may be exchanged

mark that indicates whether the terminals of one function or one component may be exchanged

nominal value of the x-displacement of the centre of gravity of a component related to the reference point of that component

nominal value of the y-displacement of the centre of gravity of a component related to the reference point of that component

factor by which the rated voltage has to be multiplied to obtain the value of the test voltage to be applied to a device under test

code of the preforming of leads to create a distance between the component and the seating-plane

code of the cross-section shape of the terminals of a component

combination of the reference to a coding system for case sizes and the code of a specific case size within that system of a component

code of the type of connect node of a component

coded abbreviation of the two dimensional projection view of an item

value as specified by level (miNomax) of the distance on the x-axis of the reference point to the zero-point

value as specified by level (miNomax) of the distance on the y-axis of the reference point to the zero-point

value as specified by level (miNomax) of the distance on the z-axis of the reference point to the zero-point

value of the denominator of the ratio of the real things magnitude to the magnitude of the model

value of the angle between the orientation of the axis of a constructive solid geometry primitive and the X-axis of the placement coordinate system

value of the angle between the orientation of the axis of a constructive solid geometry primitive and the Y-axis of the placement coordinate system

value of the angle between the orientation of the axis of a constructive solid geometry primitive and the Z-axis of the placement coordinate system

value as specified by level (miNomax) of the distance on the y-axis of the centre of a sphere

value as specified by level (miNomax) of the distance on the z-axis of the centre of a sphere

value as specified by level (miNomax) of the length of the edge of a N-edged regular column

value as specified by level (miNomax) of the length of the inner radius of a right circular tube

value as specified by level (miNomax) of the length of the outer radius of a right circular tube

code of the type of connection a terminal or connector is being designed for

value indicating the number of corners defining the column type

nominal value of the displacement of the centre of gravity of a component in z-axis direction with respect to the reference point of the component

that part of the type number of a component which identifies its generic function

code as required by a component manufacturer or supplier to identify the component when placing an order

reference to an international, regional, national standard, regulation, directive, or organization based specification etc to which an object shall be made

name or abreviation of the authority or organization being in charge of the referred specification document

reference to an international standard describing a component

reference to a regional or national standard describing a component

MIL code of the specification in which an electric, electronic or electromechanical component is released under the MIL quality assessment system

abbreviated name of the office which has approved the safety of an electric, electronic or electromechanical component

power loss of a component with losses proportional to I² during the state under load at maximum possible continuous rms current (= rated current) and measured at rated ambient temperature and at rated frequency

reference to a document depicting the power loss of a component with losses not proportional to I² during the state under load up to the maximum possible continuous rms current (= rated current) and measured at rated ambient temperature and at rated frequency

amount of electric conducting routes of an object carrying the current, contributing to thermal losses in type and routine tests

required minimum current derating factor of an electric-electronic or electromechanical component, for a specified ambient temperature higher than the rated temperature

power consumption when the item is in a non-operating up state during non-required time and measured at rated ambient temperature and rated frequency

power loss of a component with linear losses proportional to I during the state under load at maximum possible continuous rms current (= rated current) and measured at rated ambient temperature and at rated frequency

average ratio of the duration of energization to the total period in which intermittent or continuous or temporary duty takes place

thermal power loss caused by the over- current in a short-circuit or in a situation equivalent to a short-circuit measured at given duration and at rated ambient temperature