Connection facilitiesEléments de raccordementAnschlussmöglichkeiten连接件

the part(s) of the terminal necessary for the mechanical clamping and the electrical connection of the conductor(s), including the parts which are necessary to ensure the correct contact pressure

the part(s) of the terminal necessary for the mechanical clamping and the electrical connection of the conductor(s), including the parts which are necessary to ensure the correct contact pressure, second type integrated in the device

type of electrical connection of the main circuit of a device to the conductor suitable for the intended use

electrical connection and disconnection of a terminal can be performed without displacing the conductors of the corresponding circuit

type of electrical connection of auxiliary and/or control circuits of a device to the conductor suitable for the intended use

construction type enabling the device to be disconnected from the main circuit or to be removed

physical design of the electrical connection from the body of the sensor to the conductor suitable for the intended use

value of the length of the electrical connecting cable

unit which plugs into a rack and is supported by guides

material of the tubular covering of the cable

maximum cross-section expressed in AWG or kcmil size of all connectable types of conductors, rigid (solid and stranded) and flexible, stated by the manufacturer, and to which certain thermal, mechanical and electrical requirements are referred

value of the maximum cross-section of all connectable types of conductors, rigid (solid and stranded) and flexible, stated by the manufacturer, and to which certain thermal, mechanical and electrical requirements are referred

minimum cross-sections of connectable flexible conductors in AWG or kcmil size, stated by the manufacturer, and to which some mechanical and electrical requirements are referred by the performed tests

maximum cross-sections of connectable flexible conductors in AWG or kcmil size, stated by the manufacturer, and to which some mechanical and electrical requirements are referred by the performed tests

range of the cross-sections of connectable flexible conductors, stated by the manufacturer, and to which some mechanical and electrical requirements are referred by the performed tests

minimum cross-sections of connectable rigid conductors in AWG or kcmil size, stated by the manufacturer, and to which some mechanical and electrical requirements are referred by the performed tests

range of the cross-sections of connectable rigid conductors, stated by the manufacturer, and to which some mechanical and electrical requirements are referred by the performed tests

orientation of the wire connection compared to the mounting surface of the device

orientation of the main circuit connections when the device is in preferred position of use

total number of clamping units supported by the terminal assembly

number of independent conductive paths of the device

number of openings in the housing necessary for the electrical connection

mechanical characteristic of the opening in the housing necessary for the electrical connection

maximum cross-sections of connectable rigid conductors in AWG or kcmil size, stated by the manufacturer, and to which some mechanical and electrical requirements are referred by the performed tests

identification number of the conductor entry into the assembly

identification name of the conductor entry into the assembly

relative location of the part with openings which permit the passage of conductors into the assembly

dimension of the conductor entry from its reference point along axis "Z”

dimension of the conductor entry from its reference point along its axis "Y”

geometry of the of the part with openings which permit the passage of conductors into the assembly

dimension of the conductor entry from its reference point along its axis "X”

point of reference located at the extreme left (x axis), bottom (z axis) and rear (z axis) of the conductor entry