classRELITEM_CLASSv1rev 52010-11-11IEV 446-11-01:1983

relay

0112/2///61360_4#AAA171

electric) device designed to close or open one or more electric circuits by means of separate contacts, after the appearance of certain conditions in the electric input circuits controlling the device

Properties: 62
Subclasses: 0
Inherited: 92

Hierarchy#

Ancestors (top) → AAA171 (highlighted) → subclasses and powertype instances. Capped at 12 each; see the full lists in the sections below.

Higher level classes3#

Declared properties62#

62 / 62

AAE155insulation resistanceLEVEL(MIN) OF REAL_MEASURE_TYPE

minimum insulation resistance between the live and non-live parts of a switch, relay, transformer or connector

AAE350contact finishENUM_CODE_TYPE(0112/2///61360_4#ASA081)

code of the finish material of the contacts of a connector, relay or switch

AAE355contact body materialENUM_CODE_TYPE(0112/2///61360_4#ASA086)

code of the material of the body of the contacts of a connector, relay or switch

AAE506switching functionENUM_CODE_TYPE(0112/2///61360_4#ASA101)

code of the switching function of the contact assembly of a relay or switch

AAE508sealingENUM_CODE_TYPE(0112/2///61360_4#ASA102)

IEC standard code of the sealing of a relay

AAE509U/I categoryENUM_CODE_TYPE(0112/2///61360_4#ASA103)

IEC standard code of the category of contact voltage and contact current of a relay

AAE512contact voltage (ac)LEVEL(MAX) OF REAL_MEASURE_TYPE

maximum operating rms switching voltage of a switch or relay at resistive load

AAE513limiting contact voltageLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum dc voltage of a switch or relay across open contacts

AAE515contact current (ac)LEVEL(MAX) OF INT_MEASURE_TYPE

maximum rms switching current of a switch or relay at resistive load

AAE907stabilityENUM_CODE_TYPE(0112/2///61360_4#ASA149)

code of the condition of a relay after the energising quantity is removed

AAE911energising current (dc)LEVEL(NOM) OF REAL_MEASURE_TYPE

nominal dc current which, when applied to the coil of a relay, enables it to operate at the reference temperature

AAE912energising current (ac)LEVEL(NOM) OF REAL_MEASURE_TYPE

nominal ac current which, when applied to the coil of a relay, enables it to operate at the reference temperature

AAE915energising voltage (dc)LEVEL(NOM) OF REAL_MEASURE_TYPE

nominal dc voltage which, when applied to the coil of a relay, enables it to operate

AAE916energising voltage (ac)LEVEL(NOM) OF REAL_MEASURE_TYPE

nominal ac voltage which, when applied to the coil of a relay, enables it to operate

AAE918coil-contact capacitanceLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum parasitic capacitance between a contact member and the coil of a relay

AAE919contact capacitanceLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum parasitic capacitance between two contact members of a relay

AAE920contact resistanceLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum resistance of a mated set of contacts of a connector, relay or switch

AAE921number of contact assembliesLEVEL(NOM) OF INT_MEASURE_TYPE

number of contact assemblies of a relay or switch

AAE922mechanical durabilityLEVEL(MIN) OF INT_MEASURE_TYPE

guaranteed number of no-load operating cycles (i.e. without current at the main contacts) which can be effected before it becomes necessary to replace the item, or when possible to service or replace any parts of this item

AAE923operate timeLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum time between the instant the energising power is applied and the instant the relay completes the specified function

AAE924release timeLEVEL(MAX) OF INT_MEASURE_TYPE

maximum time between the instant the energising quantity is applied and the instant when the relay resets

AAE925contact member forceENUM_CODE_TYPE(0112/2///61360_4#ASA150)

code of the kind of force applied to the contact member of a relay

AAE928contact power (ac)LEVEL(MAX) OF REAL_MEASURE_TYPE

maximum switching apparent power as a product of the actual ac contact voltage and the actual ac contact current applied in combination to a switch or relay at resistive load

AAE930bounce timeLEVEL(MAX) OF INT_MEASURE_TYPE

maximum time interval between the instant when the contact circuit first closes (opens) and the instant when the circuit is finally closed (opened) of a relay or switch

AAF048number of primary coilsLEVEL(NOM) OF INT_MEASURE_TYPE

number of primary coils of a power transformer or relay

AAF050release voltage (ac)LEVEL(MAX) OF REAL_MEASURE_TYPE

maximum ac voltage at which an energised relay releases

AAF090dc resistanceLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum resistance to direct current of a coil of a wirewound component

AAF106contact current (dc)LEVEL(MAX) OF INT_MEASURE_TYPE

maximum dc switching current of a switch or relay at resistive load

AAF107contact voltage (dc)LEVEL(MAX) OF REAL_MEASURE_TYPE

maximum operating rms switching voltage of a switch or relay at resistive load

AAF125contact spring materialENUM_CODE_TYPE(0112/2///61360_4#ASA167)

code of the material of the spring of the contacts of a connector, relay or switch

AAF129release voltage (dc)LEVEL(MAX) OF REAL_MEASURE_TYPE

maximum dc voltage at which an energised relay releases

AAF130contact power (dc)LEVEL(MAX) OF REAL_MEASURE_TYPE

maximum switching apparent power as a product of the actual dc contact voltage and the actual dc contact current applied in combination to a switch or relay at resistive load

AAR001operate voltageLEVEL(MIN) OF REAL_MEASURE_TYPE

minimum value of the input voltage of a relay required to ensure that the relay operates at the specified ambient temperature

AAR002magnet systemENUM_CODE_TYPE(0112/2///61360_4#ASA311)

code of the type of magnet system of a relay

AAR003energization time (for operation)LEVEL(MIN) OF REAL_MEASURE_TYPE

minimum duration of the input voltage of a relay required to ensure that the relay operates

AAR004breaking capacityLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum value of the current (rms if ac) which an output circuit of a relay is capable of breaking at specified contact voltage and ambient temperature

AAR005making capacityLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum value of the current (rms if ac) which an output circuit of a relay is capable of making at specified contact voltage and ambient temperature

AAR006electrical enduranceLEVEL(MIN) OF REAL_MEASURE_TYPE

minimum number of cycles of a relay until failure at specified contact voltage, contact current and ambient temperature

AAR007limiting continuous currentLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum value of the current (rms if ac), which a previously closed contact circuit of a relay is capable of carrying at specified temperature

AAR008limiting short-term currentLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum value of the current which a previously closed contact circuit of a relay is capable of carrying for a specified duration and at a specified ambient temperature

AAR009bridging timeLEVEL(MIN) OF REAL_MEASURE_TYPE

For a change-over make-before-break contact of a relay, the minimum time interval during which both contact circuits are closed

AAR010transfer timeLEVEL(MIN) OF REAL_MEASURE_TYPE

For a change-over break-before-make contact of a relay, the minimum time interval during which both contact circuits are open

AAR011coil transient suppression deviceENUM_CODE_TYPE(0112/2///61360_4#ASA312)

code of a device connected to the coil of a relay in order to limit the voltage transients to a prescribed value

AAR012frequency of operationLEVEL(MAX) OF INT_MEASURE_TYPE

maximum number of cycles per unit of time at which a relay may operate

AAR013AAR013

AAR014coil temperature limitLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum permissible mean temperature of the coil of a relay under steady-state conditions

AAR015dutyENUM_CODE_TYPE(0112/2///61360_4#ASA313)

code which specifies the kind of duty cycle of relay operation

AAR016accessoriesENUM_CODE_TYPE(0112/2///61360_4#ASA314)

code for the available accessories for relays

AAR017pollution degreeENUM_CODE_TYPE(0112/2///61360_4#ASA315)

code for a numeric level characterizing the specified maximum pollution of the micro-environment of a relay

AAR018overvoltage categoryENUM_CODE_TYPE(0112/2///61360_4#ASA316)

code for a numeric category characterizing the specified transient overvoltage conditon of a relay

AAR019rms. withstand voltageLEVEL(MIN) OF REAL_MEASURE_TYPE

minimum rms voltage, applied between the specified conductive parts of a relay, which does not cause breakdown

AAR021impulse withstand voltageLEVEL(MIN) OF REAL_MEASURE_TYPE

minimum value of impulse voltage with specified pulse shape, applied between specified conductive parts of a relay, which does not cause breakdown

AAR022AAR022

AAR023operating voltage rangeENUM_CODE_TYPE(0112/2///61360_4#ASA319)

code indicating the range of the input voltage over which a relay performs its prescribed function

AAR024non-release voltageLEVEL(MIN) OF REAL_MEASURE_TYPE

minimum input voltage at which an energized relay does not release

AAR025contact materialENUM_CODE_TYPE(0112/2///61360_4#ASA320)

code of the material forming the contact points of a relay

AAR026clearanceLEVEL(MIN) OF REAL_MEASURE_TYPE

shortest distance in air between two specified conductive parts of a relay

AAR027creepage distanceLEVEL(MIN) OF REAL_MEASURE_TYPE

shortest distance along the surface of insulating material between two specified conductive parts of a relay

AAR028soldering conditionsENUM_CODE_TYPE(0112/2///61360_4#ASA321)

code for the soldering conditions of a relay

AAR029vibration resistanceENUM_CODE_TYPE(0112/2///61360_4#ASA322)

code for the resistance of a relay to vibration for a specified pulse duration at specified test criteria

AAR030shock resistanceLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum shock acceleration which a relay is capable to withstand for a specified half-sine pulse duration at specified test criteria

AAR031flammabilityENUM_CODE_TYPE(0112/2///61360_4#ASA323)

code for the resistance of a relay to ignition indicated by test procedure and severity

Inherited properties (92) — click to expand

AAE007terminal shapeENUM_CODE_TYPE(0112/2///61360_4#ASA026)

code of the shape of the terminals of an electric, electronic or electromechanical component

AAE008terminal placementENUM_CODE_TYPE(0112/2///61360_4#ASA027)

code indicating the placement of the terminals of an electric-electronic or electromechanical component

AAE023terminal diameterLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the diameter of the terminals of an electric-electronic or electromechanical component

AAE024terminal pitchLEVEL(NOM) OF REAL_MEASURE_TYPE

nominal pitch of the terminals of an electric, electronic or electromechanical component

AAE060category EM componentENUM_CODE_TYPE(0112/2///61360_4#ASA040)

code of the category to which an electromechanical component belongs

AAE072terminal lengthLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the length of the terminals of an electric-electronic or electromechanical component extending below the seating plane

AAE259shape/size code BSIENUM_CODE_TYPE(0112/2///61360_4#ASA070)

BSI code of the shape/size of an electric-electronic or electromechanical component for placement on printed circuits

AAE540current rmsLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum rms current of an electric-electronic or electromechanical component at specified ambient temperature

AAE633lacquered lengthLEVEL(MAX) OF REAL_MEASURE_TYPE

maximum length of the body of an electric/ electronic or electromechanical component with axial leads, including the lacquered part of the leads

AAE634terminal materialENUM_CODE_TYPE(0112/2///61360_4#ASA121)

code of the terminal material of an electric-electronic or electromechanical component

AAE754number of terminalsLEVEL(NOM) OF INT_MEASURE_TYPE

number of electrical terminals of an electric/ electronic or electromechanical component

AAE841storage temperatureLEVEL(MIN,MAX) OF INT_MEASURE_TYPE

permissible temperature range at which the device may be stored without any voltage being applied

AAF316hole pitchLEVEL(NOM) OF REAL_MEASURE_TYPE

nominal pitch of the holes of an electric/electronic or electromechanical component parallel to the x coordinate

AAF317flange lengthLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the length of the flange of a component in the x-direction

AAF319flange heightLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the height of the flange of an electric/electronic or electromechanical component

AAF320body diameterLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the diameter of the body of an electric/electronic or electromechanical component

AAF321pitch (x-axis)LEVEL(NOM) OF REAL_MEASURE_TYPE

nominal pitch of the terminals of an electric/electronic or electromechanical component parallel to the x coordinate

AAF322pitch (y-axis)LEVEL(NOM) OF REAL_MEASURE_TYPE

nominal pitch of the terminals of an electric/electronic or electromechanical component parallel to the y coordinate

AAF337pitch circle diameterLEVEL(NOM) OF REAL_MEASURE_TYPE

nominal diameter of the pitch circle of the terminals of an electric, electronic or electromechanical component

AAF338terminal breadthLEVEL(NOM) OF REAL_MEASURE_TYPE

nominal breadth of the terminals of an electric, electronic or electromechanical component

AAF339terminal thicknessLEVEL(NOM) OF REAL_MEASURE_TYPE

nominal thickness of the terminals of an electric, electronic or electromechanical component

AAF340offset (y-axis)LEVEL(NOM) OF REAL_MEASURE_TYPE

nominal offset of the terminals of an electric, electronic or electromechanical component parallel to the y coordinate

AAF341offset (x-axis)LEVEL(NOM) OF REAL_MEASURE_TYPE

nominal offset of the terminals of an electric, electronic or electromechanical component parallel to the x coordinate

AAF342flange diameterLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the diameter of the flange of an electric/electronic or electromechanical component

AAF343mounting methodENUM_CODE_TYPE(0112/2///61360_4#ASA214)

code of the mounting method of an electric/electronic or electromechanical component

AAF345terminal exit position SMDENUM_CODE_TYPE(0112/2///61360_4#ASA216)

code indicating the exit position of the terminals of an electric/electronic or electromechanical component

AAF346terminal exit position non-SMDENUM_CODE_TYPE(0112/2///61360_4#ASA217)

code indicating the exit position of the terminals of electric/electronic or electromechanical components

AAF347terminal shape non-SMDENUM_CODE_TYPE(0112/2///61360_4#ASA218)

code of the terminal shape of an electric/electronic or electromechanical component

AAF348terminal shape SMDENUM_CODE_TYPE(0112/2///61360_4#ASA219)

code of the terminal shape of an electric/electronic or electromechanical component

AAF351number of holesLEVEL(NOM) OF INT_MEASURE_TYPE

number of holes in an electric, electronic or electromechanical component

AAF352basic aspectENUM_CODE_TYPE(0112/2///61360_4#ASA220)

code of the basic aspect of the shape of an electric/electronic or electromechanical component

AAF373number of studsLEVEL(NOM) OF INT_MEASURE_TYPE

number of studs on an electric/electronic or electromechanical component designed for fastening

AAF374number of pitches (x-axis)LEVEL(NOM) OF INT_MEASURE_TYPE

number of pitches between the terminals of an electric/electronic or electromechanical component parallel to the x-coordinate

AAF375number of pitches (y-axis)LEVEL(NOM) OF INT_MEASURE_TYPE

number of pitches between the terminals of an electric/electronic or electromechanical component parallel to the y-coordinate

AAE347CECC specificationSTRING_TYPE

CECC code of the specification in which an electric/ electronic or electromechanical component is released under the CECC quality assessment system

AAE257power dissipationLEVEL(MAX) OF REAL_MEASURE_TYPE

permissible power which may be dissipated continuously, at normal operating conditions

AAE001main class of componentENUM_CODE_TYPE(0112/2///61360_4#ASA020)

code of the main functional class to which a component belongs

AAE022outside diameterLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the outside diameter of a component with a body of circular cross-section

AAE683temperature typeENUM_CODE_TYPE(0112/2///61360_4#ASA124)

IEC code of the type of temperature indicating the specific part of a component, or its environment, to which it applies

AAE685temperatureINTEGER_MEASURE_TYPE

temperature of a component, or its environment, as a variable

AAE687quality approval authorityENUM_CODE_TYPE(0112/2///61360_4#ASA126)

abbreviated name of the authority for quality certification of products

AAE753inside diameterLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the inside diameter of a component with a body of circular cross-section

AAF276stress temperature minLEVEL(MIN) OF INT_MEASURE_TYPE

minimum temperature applied to a component during cycle stress

AAF277stress temperature maxLEVEL(MAX) OF INT_MEASURE_TYPE

maximum temperature applied to a component during cycle stress

AAF278stress ambient temperatureLEVEL(NOM) OF INT_MEASURE_TYPE

nominal ambient free air temperature applied to a component during high temperature life test

AAF279stress relative humidityLEVEL(NOM) OF INT_MEASURE_TYPE

nominal value of the ambient humidity relative to saturation humidity, applied to a component during humidity resistance stress

AAF318flange breadthLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the breadth of the flange of a component in the y-direction

AAF344body shapeENUM_CODE_TYPE(0112/2///61360_4#ASA215)

code of the shape of the body of an electric/electronic or electromechanical component

AAF356reference viewENUM_CODE_TYPE(0112/2///61360_4#ASA221)

code indicating the angle of vision on a component serving as standard for describing the component

AAF357terminal identifierSTRING_TYPE

one or more characters used to identify a specific terminal of a component

AAF358swapability indicatorSTRING_TYPE

mark that indicates whether the terminal pairs or terminal groups of one function or one component may be exchanged

AAF359permutability indicatorSTRING_TYPE

mark that indicates whether the terminals of one function or one component may be exchanged

AAF362centre of gravity (x-axis)LEVEL(NOM) OF REAL_MEASURE_TYPE

nominal value of the x-displacement of the centre of gravity of a component related to the reference point of that component

AAF363centre of gravity (y-axis)LEVEL(NOM) OF REAL_MEASURE_TYPE

nominal value of the y-displacement of the centre of gravity of a component related to the reference point of that component

AAF369test voltage coefficientLEVEL(NOM) OF REAL_MEASURE_TYPE

factor by which the rated voltage has to be multiplied to obtain the value of the test voltage to be applied to a device under test

AAF372preformed leadENUM_CODE_TYPE(0112/2///61360_4#ASA224)

code of the preforming of leads to create a distance between the component and the seating-plane

AAF376terminal cross-section shapeENUM_CODE_TYPE(0112/2///61360_4#ASA225)

code of the cross-section shape of the terminals of a component

AAF388case sizeSTRING_TYPE

combination of the reference to a coding system for case sizes and the code of a specific case size within that system of a component

AAF391connect-node codeENUM_CODE_TYPE(0112/2///61360_4#ASA227)

code of the type of connect node of a component

AAF392project view codeENUM_CODE_TYPE(0112/2///61360_4#ASA228)

coded abbreviation of the two dimensional projection view of an item

AAF393x-coordinate of the reference pointLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the distance on the x-axis of the reference point to the zero-point

AAF394y-coordinate of the reference pointLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the distance on the y-axis of the reference point to the zero-point

AAF395z-coordinate of the reference pointLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the distance on the z-axis of the reference point to the zero-point

AAF396scaleLEVEL(NOM) OF REAL_MEASURE_TYPE

value of the denominator of the ratio of the real things magnitude to the magnitude of the model

AAF411angle axis to x-axisLEVEL(NOM) OF REAL_MEASURE_TYPE

value of the angle between the orientation of the axis of a constructive solid geometry primitive and the X-axis of the placement coordinate system

AAF412angle axis to y-axisLEVEL(NOM) OF REAL_MEASURE_TYPE

value of the angle between the orientation of the axis of a constructive solid geometry primitive and the Y-axis of the placement coordinate system

AAF413angle axis to z-axisLEVEL(NOM) OF REAL_MEASURE_TYPE

value of the angle between the orientation of the axis of a constructive solid geometry primitive and the Z-axis of the placement coordinate system

AAF419y-coordinate of centreLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the distance on the y-axis of the centre of a sphere

AAF420z-coordinate of centreLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the distance on the z-axis of the centre of a sphere

AAF429edge-lengthLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the length of the edge of a N-edged regular column

AAF430internal radiusLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the length of the inner radius of a right circular tube

AAF431external radiusLEVEL(MIN,MAX,NOM) OF REAL_MEASURE_TYPE

value as specified by level (miNomax) of the length of the outer radius of a right circular tube

AAF435terminal connection typeENUM_CODE_TYPE(0112/2///61360_4#ASA229)

code of the type of connection a terminal or connector is being designed for

AAF437column typeLEVEL(NOM) OF INT_MEASURE_TYPE

value indicating the number of corners defining the column type

AAF472z-axis displacement of centre of gravityLEVEL(NOM) OF REAL_MEASURE_TYPE

nominal value of the displacement of the centre of gravity of a component in z-axis direction with respect to the reference point of the component

AAH548generic type numberSTRING_TYPE

that part of the type number of a component which identifies its generic function

AAH549ordering codeSTRING_TYPE

code as required by a component manufacturer or supplier to identify the component when placing an order

ADA081specification documentSTRING_TYPE

reference to an international, regional, national standard, regulation, directive, or organization based specification etc to which an object shall be made

ADA082specifying organizationSTRING_TYPE

name or abreviation of the authority or organization being in charge of the referred specification document

AAE012international standardSTRING_TYPE

reference to an international standard describing a component

AAF043national standardSTRING_TYPE

reference to a regional or national standard describing a component

AAF370MIL specificationSTRING_TYPE

MIL code of the specification in which an electric, electronic or electromechanical component is released under the MIL quality assessment system

AAE149safety approvalENUM_CODE_TYPE(0112/2///61360_4#ASA058)

abbreviated name of the office which has approved the safety of an electric, electronic or electromechanical component

ADA084ADA084

ADA085load loss proportional to I²REAL_MEASURE_TYPE

power loss of a component with losses proportional to I² during the state under load at maximum possible continuous rms current (= rated current) and measured at rated ambient temperature and at rated frequency

ADA086load loss non-proportional to I²URI_TYPE

reference to a document depicting the power loss of a component with losses not proportional to I² during the state under load up to the maximum possible continuous rms current (= rated current) and measured at rated ambient temperature and at rated frequency

ADA087number of current carrying pathsINT_TYPE

amount of electric conducting routes of an object carrying the current, contributing to thermal losses in type and routine tests

ADA088current derating factorLEVEL(MIN) OF REAL_MEASURE_TYPE

required minimum current derating factor of an electric-electronic or electromechanical component, for a specified ambient temperature higher than the rated temperature

ADA298power drain in deenergized stateLEVEL(MAX) OF REAL_MEASURE_TYPE

power consumption when the item is in a non-operating up state during non-required time and measured at rated ambient temperature and rated frequency

ADA299linear load lossREAL_MEASURE_TYPE

power loss of a component with linear losses proportional to I during the state under load at maximum possible continuous rms current (= rated current) and measured at rated ambient temperature and at rated frequency

ADA128average duty factorLEVEL(NOM) OF REAL_MEASURE_TYPE

average ratio of the duration of energization to the total period in which intermittent or continuous or temporary duty takes place

ADA129short-circuit power lossREAL_MEASURE_TYPE

thermal power loss caused by the over- current in a short-circuit or in a situation equivalent to a short-circuit measured at given duration and at rated ambient temperature

Subclasses#

No subclasses

This class is a leaf — no other classes inherit from it.

Metadata#

Source document: IEV 446-11-01:1983
Version: 1
Revision: 5
Status: Standard
Publisher: IEC
Published in: IEC 61360-4
Responsible committee: IEC/SC 3D
Change request: C00146
Dates: Original: 2010-11-11
Current version: 2010-11-11
Current revision: 2023-04-17

Full source data#

Every key from the original .xls export, including multilingual variants, status, publisher, committee, and workbook-specific codes.

Raw properties (20 keys from source .xls) — click to expand

C002: C00146
C011: IEC
C012: IEC 61360-4
C016: Standard
MDC_P001_5: 0112/2///61360_4#AAA171
MDC_P002_1: 1
MDC_P002_2: 5
MDC_P003_0: 2023-04-17
MDC_P003_1: 2010-11-11
MDC_P003_2: 2010-11-11
MDC_P003_3: 2023-04-17
MDC_P004.en: relay
MDC_P005.en: REL
MDC_P006_1: IEV 446-11-01:1983
MDC_P006.en: electric) device designed to close or open one or more electric circuits by means of separate contacts, after the appearance of certain conditions in the electric input circuits controlling the device
MDC_P010: 0112/2///61360_4#AAA147
MDC_P011: ITEM_CLASS
MDC_P012: IEC/SC 3D
MDC_P014: {0112/2///61360_4#AAE155,0112/2///61360_4#AAE350,0112/2///61360_4#AAE355,0112/2///61360_4#AAE506,0112/2///61360_4#AAE508,0112/2///61360_4#AAE509,0112/2///61360_4#AAE512,0112/2///61360_4#AAE513,0112/2///61360_4#AAE515,0112/2///61360_4#AAE907,0112/2///61360_4#AAE911,0112/2///61360_4#AAE912,0112/2///61360_4#AAE915,0112/2///61360_4#AAE916,0112/2///61360_4#AAE918,0112/2///61360_4#AAE919,0112/2///61360_4#AAE920,0112/2///61360_4#AAE921,0112/2///61360_4#AAE922,0112/2///61360_4#AAE923,0112/2///61360_4#AAE924,0112/2///61360_4#AAE925,0112/2///61360_4#AAE928,0112/2///61360_4#AAE930,0112/2///61360_4#AAF048,0112/2///61360_4#AAF050,0112/2///61360_4#AAF090,0112/2///61360_4#AAF106,0112/2///61360_4#AAF107,0112/2///61360_4#AAF125,0112/2///61360_4#AAF129,0112/2///61360_4#AAF130,0112/2///61360_4#AAR001,0112/2///61360_4#AAR002,0112/2///61360_4#AAR003,0112/2///61360_4#AAR004,0112/2///61360_4#AAR005,0112/2///61360_4#AAR006,0112/2///61360_4#AAR007,0112/2///61360_4#AAR008,0112/2///61360_4#AAR009,0112/2///61360_4#AAR010,0112/2///61360_4#AAR011,0112/2///61360_4#AAR012,0112/2///61360_4#AAR013,0112/2///61360_4#AAR014,0112/2///61360_4#AAR015,0112/2///61360_4#AAR016,0112/2///61360_4#AAR017,0112/2///61360_4#AAR018,0112/2///61360_4#AAR019,0112/2///61360_4#AAR021,0112/2///61360_4#AAR022,0112/2///61360_4#AAR023,0112/2///61360_4#AAR024,0112/2///61360_4#AAR025,0112/2///61360_4#AAR026,0112/2///61360_4#AAR027,0112/2///61360_4#AAR028,0112/2///61360_4#AAR029,0112/2///61360_4#AAR030,0112/2///61360_4#AAR031}
MDC_P019: true

Version history4#

IEC CDD records every published revision of each entity — version number, status, timestamp, and the change request that introduced it. OpenCDD captures the full chain of custody from cdd.iec.ch; the entry marked Current is the one rendered on this page.